Zenith Aircraft Building Workshop Comes to Florida in December for the Sun ‘n Fun Holiday Flying Festival

Zenith Aircraft Building Workshop Comes to Florida in December for the Sun 'n Fun Holiday Flying Festival

Lakeland, Florida:

Zenith Aircraft Company is coming to Florida for Sun 'n Fun’s Holiday Flying Festival and Car Show in early December to host its popular hands-on kit aircraft building workshop. The two-day workshop will be held December 3 & 4, 2020 (immediately before the Flying Festival), on the Sun ’n Fun Expo campus. In January 2020, Zenith hosted a workshop session in Edgewater, Florida (at Wheels & Wings), but other Florida events, such as the Sun 'n Fun Expo (in April) and the DeLand Sport Aviation Showcase (November), were canceled due to the coronavirus pandemic. The Sun ‘n Fun Flying Festival is “a perfect time and place” to bring the Zenith workshops back to Florida this year, according to Sebastien Heintz, Zenith Aircraft’s president.
The workshop will start on Thursday morning, December 3, inside the Buehler Aerospace Restoration and Training Center, part of the Aerospace Center for Excellence (ACE) at the Sun ’n Fun complex at Lakeland Linder International Airport in central Florida. The Buehler Hangar is familiar with Zenith aircraft kits: Members of the Lakeland Aero Club have been building a Zenith CH 750 Cruzer kit airplane this past year (that will serve as a trainer for physically disabled pilots once completed, part of a project between Able Flight and the Central Florida Aerospace Academy, which sponsors the Aero Club).
Zenith Aircraft’s hands-on workshops are primarily for first-time kit airplane builders and have become popular with sport aviation enthusiasts who are considering to build their own aircraft and are unsure if they have the required skills, workspace and tools. During the workshop each participant builds and assembles their own Zenith aircraft rudder tail section from a standard Zenith kit. The two-day workshop concludes once participants have successfully completed assembly of their own rudder tail section of the aircraft.
In the process of building the rudder assembly, participants tackle many activities including learning how to read drawings (blueprints) and work with assembly instructions (manuals) under the expert guidance of factory staff. They learn the procedures for putting together an aircraft assembly, including drilling and blind riveting. In the end, they have an assembled rudder that is ready to install on a Zenith kit airplane.

“The rest of the kit is constructed the same way as the rudder, using the same tools,” said Heintz. “Participants get far more out of the workshop than just a finished aircraft rudder: they go home with the knowledge, skills and confidence they need to build their own airplane. Most importantly, they learn that kit building is enjoyable and something that can engage the whole family. Many of our prospective builders bring their spouses or other family member, who often encourage them to move forward with the rest of the kit. With modern technology, such as final hole size CNC match drilled parts, and good instructions, aircraft construction has become much easier than most people think.”

The hands-on workshop is an excellent way to learn about building your own (amateur-built) kit airplane and about the many advantages of owning and flying an airplane that you’ve built yourself. Kit aircraft is a segment of general aviation that is growing (while much of general aviation activities continue to decline year over year). For many, building an aircraft is a very rewarding experience, and today’s modern kits make it easier and quicker to build than even before.
Standard workshop fees are $375.00 (or $425 for the CH 750 Super Duty model) and include the complete rudder kit for a Zenith aircraft. Additional helpers are encouraged to attend and can participate for free. To learn more about the workshop program, visit zenithair.com or call Zenith Aircraft directly: (573) 581-9000 (Mon – Fri, 8 – 5 Central). Prior registration is required for the rudder workshop. Click here to register for the December workshop in Florida. Zenith Aircraft's Sebastien Heintz and Roger Dubbert plan to attend the workshop.

Sun ‘n Fun’s Holiday Flying Festival and Car Show officially kicks off at 1 pm on Friday, December 4, and runs through Saturday, December 5. A highlight of the event includes a STOL (Short Takeoff and Landing) Competition on Saturday afternoon (with Jon Humberd competing in his “Super 701” and Viking Aircraft Engines with their custom STOL CH 750 Super Duty, powered by a Honda conversion), and a General Aviation Town Hall discussion with AOPA President and CEO Mark Baker, EAA President, CEO and Board Chairman Jack Pelton, and Sun ’n Fun’s President and CEO John "Lites" Leenhouts. Other planned activities include airplane displays (with homebuilt / kit aircraft), aircraft camping, live music, and more!

Zenith builders, pilots and enthusiasts are invited to attend and visit at the workshop and the Flying Festival. See you there!!

Views: 150

Comment

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

Comment by Zenith Aero on October 2, 2020 at 2:51pm

Nice video about the Zenith CH 750 Cruzer "Spirit of Lakeland" airplane project being built at the Buehler Hangar at Sun'n Fun, the same hangar where the December workshop will be held.

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2020   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service