Travis Corbin's Blog – September 2009 Archive (1)

Horizontal Stabilizer Dimensions... Frustration!

For plans builders... Our experience was that the nose ribs on the horizontal stabilizer were 3 mm too long. If you shorten the nose ribs from the back, make sure you make the forward flange wider to leave enough edge distance for the forward rivet. You can lengthen the tip ribs, but then you have to lengthen the skin. Three sets of nose ribs later, stabs are complete.

Added by Travis Corbin on September 13, 2009 at 9:30pm — 1 Comment

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service