Latches for the rear corner of the doors. Made from 1/4" stainless hyd tubing. Silver soldered in a "bullet tip".

Door flanges are bowed, creating gaps. Haven't decided what to do about it (if anything).…

Seam sealing completed after this pic. Finished this up around 1:30 am last night.

Compass and Dynon both dead on West.  Yeah!

Made this de-Gaussing coil by wrapping a bunch of magnet wire around a coffee can. I didn't make enough wraps to plug straight into the wall, coil got hot. Had to use the variac. This thing will magnetize or…

Almost ready for final finish.…

Painted the right hand wing today. Fuselage is etched and ready for prime.

Got my Biennial Flight Review last week.I am extremely inspired to complete this project.…

Time to paint fuselage and final install windscreen. The aircraft really fills up the shop when assembled. It's nice to walk around without ducking under the wings.

Flaperons, slats, and struts primed.…

Some of the tools I have used to build the 701

Grob 24" I converted to single phase(replaced motor and added gbox). Very useful for airplane building.

South Bend Heavy 10 tool room lathe with taper attachment. Knobs are painted with wife's old…