Online Community of Zenith Builders and Flyers
Fred Westbrook, of Owego, New York, sent us this inspiring story of his build experience that we share below.
Don’t Get Discouraged
My name is Fred Westbrook. A few years ago, when my son Josh was about fourteen years…
ContinueAdded by Zenith Aero on May 13, 2021 at 2:30pm — 9 Comments
[Paul Gabehart, of Campbellsville, Kentucky, sent us this "builder report" on the day he received his FAA airworthiness certificate, which was just 7 months, 3 weeks from the date he picked up the kit at the factory and attended the hands-on Zenith rudder workshop class. He modestly says "I really did not intend on building in what I understand is a short time. I found building was like drinking a milkshake: Taking your time can be a challenge when it tastes so so…
ContinueAdded by Zenith Aero on August 12, 2020 at 3:30pm — 7 Comments
There are some great free resources available to new builders, especially useful to introduce yourself to some of the kit skills and concepts you'll use building your own aircraft.
Zenith YouTube Channel. We publish a lot on our YouTube channel, from flying videos,…
ContinueAdded by Zenith Aero on April 16, 2020 at 11:47am — 1 Comment
Check out this gorgeous photo of Mark Phillips in his custom Zenith STOL CH 701, featured in the October 2018 issue of EAA Sport Aviation magazine.…
ContinueAdded by Zenith Aero on September 27, 2018 at 1:00pm — 1 Comment
The Tehachapi Society of Pilots of California has partnered with Oak Valley Charter Schools to build an airplane with high school students (providing successful students with scholastic credit).
The…
ContinueAdded by Zenith Aero on January 11, 2018 at 2:00pm — No Comments
Below are a few simple tools I have made that others may find useful.
1. Wooden "gage" blocks- I have all sorts of bits of left over 2x4's. It has been useful to cut those into lengths such as 1",3/4", etc. If I need to elevate part above the table a little bit, I have a good selection of "calibrated" heights to work from. And as can be seen from the holes, they make good backer blocks for drilling. And for those last little bits of tweaking, door shims work quite…
ContinueAdded by Damon Brantley on February 20, 2017 at 11:00am — 8 Comments
Nice article on RAA Chapter 85's Zenith CH 750 Cruzer build project.
ContinueAdded by Zenith.Aero on June 24, 2016 at 12:01pm — 1 Comment
Added by Ron Lendon on August 2, 2012 at 10:07pm — 7 Comments
The …
ContinueAdded by Sebastien Heintz on July 13, 2012 at 4:00am — 2 Comments
The following was published by GeneralAviationNews.com on July 9, 2012, by Janice Wood
ContinueAdded by Zenith.Aero on July 10, 2012 at 10:30am — 2 Comments
Added by Sebastien Heintz on August 12, 2010 at 9:30pm — 1 Comment
Added by Sebastien Heintz on August 22, 2009 at 9:00am — 2 Comments
2026
2025
2024
2023
2022
2021
2020
2019
2018
2017
2016
2015
2014
2013
2012
2011
2010
2009
2008
1999
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2026 Created by Zenith.Aero.
Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).