All Blog Posts (2,347)

Nebraska City

I am going to be in Nebraska City working from 9-15-09 until 10-22-09 and would like to take a look at any projects in the area. If anyone is in that area and willin' just e-mail me at; flybob13@yahoo.com
Thanks,
Bob

Added by Robert Crawford on September 5, 2009 at 8:15pm — No Comments

Visit with Tom Poberezny of the Experimental Aircraft Association (EAA)

September 2, 2009 - Mexico, Missouri

Today we had a nice visit with Tom Poberezny, the chairman and president of EAA. I gave Tom a tour of the factory, and showed him the new STOL CH 701 and the factory demonstrator Zodiac XL on this beautiful September day.

Over lunch, Tom provided an update on EAA's continuing efforts in promoting sport… Continue

Added by Sebastien Heintz on September 2, 2009 at 5:00pm — 2 Comments

Work in progress: Video for newsletter #174

Take a moment to look at these sample video clips that will be included in the next Zenair newsletter video. We highlight our trip to the Zenith booth at the Oshkosh show where we interviewed the builders and pilots of some amazing aircraft - including a CH801 with a V8 engine, a show stopping 701 on floats, details on the upcoming float kit package from Zenair, and much, much more! Also, we will have a first hand account of a modification/innovation from a 601XL builder that has found a way to… Continue

Added by Zenair News on August 25, 2009 at 9:00am — 3 Comments

Making progress

Progress is happening in my shop. The flapperons are hung but not connected to the controls yet (needed some 090 to make the barckets out of). The slats are mostly mounted. I have a guy coming tomorrow to look at what I need for upholstery. I have dark red and grey leather. Pretty soon the wings will be able to come back off so I'll be able to move in my garage again.



Oh, and the big step is that the paperwork has been processed for my registration marks. I don't know what they are… Continue

Added by Doug MacDonald on August 24, 2009 at 9:06pm — No Comments

Good news for an old man

Whooopeeee! passed the medical exam with flying colors, now to get back into the air and get the bi-annual review under the belt, then on to mexico,Mo for additional flight instruction with the factory team prior to first flight. Hot dog, now if I can get the guy making the cowl to get off dead center and get it done we can fly!

Added by Phillip Owens on August 22, 2009 at 4:48pm — 2 Comments

EAA "Hints for Homebuilders" Video Clips

The Experimental Aircraft Association (EAA) website publishes "Hints for Homebuilders" video clips, with some useful how-to building information and introductory info on tools, etc.

Though some of these videos are a little too Sonex-centric (they're neighbors with EAA headquarters in Oshkosh) a lot of the information also applies to building a Zenith:



Here's a sample:…



Continue

Added by Sebastien Heintz on August 22, 2009 at 9:00am — 2 Comments

It is flying

Add my 601XL to the list of those flying.
It is N6ZK
It took off for the first time yesterday evening.
It flew as advertised.
The O235 seems to be a good engine for this airplane.
Everything stayed in the green
Stalls were at 46 mph.
Bill Campbell

Added by William Campbell on August 18, 2009 at 10:53am — 5 Comments

autopilot

In the last photos I have mounting a Trio -Avionics autopilot with the servos directly atack to the control bar.
The result is very good and the autopilot funtion very well.
I have tested this autopilot in all aircraft actuations and have a very good response.
Fly alone!!!

Added by Antonio Gil on August 16, 2009 at 11:04am — 1 Comment

my shop and status on Aug 15

Added by Walter.Koeppel on August 16, 2009 at 10:47am — No Comments

Rotec... TBI - 40 Mechanical Fuel Injection

Check out this new system by Rotec... TBI - 40 Mechanical Fuel Injection! Designed for engines 80hp to 160hp...
http://www.rotecradialengines.com/TBI/TBI.htm#Price
First introduced at Oshkosh... very interesting and priced right pretty reasonable...

Added by Ron D Leclerc on August 15, 2009 at 10:49am — 6 Comments

update 8-14-09

I thought it was time to give an update on my corvair 601XL. The airplane has 72 hrs on it now...keep in mind that the first flight was just in the middle of june. Since the moment we mounted the engine I have only adjusted the timing, changed the oil and pulled the plugs for inspection. Haven't had to turn a single bolt or screw on the fwf. It has turnkey reliability. I flew from FL to PIT then onto oshkosh and back to PIT. I have carried a few passengers including my father.



My… Continue

Added by Louis Kantor on August 14, 2009 at 9:38pm — No Comments

Ordered Engine Today

Placed on order a Jabiru 3300 and complete firewall forward kit for my STOL 750. Made a few changes to the standard kit, including the Sensenich ground-adjustable prop, optional tachometer pick-up and cabin heat. The folks at jabiru USA in Shelbyville were great. They had a quote prepared within one day and were quick to answer all my questions. Should arrive in three weeks.

Added by Russ Bens on August 11, 2009 at 2:30am — 16 Comments

More to do while waiting for the cowl

Since we are still waiting for the cowl we decided to take advantage of the time and have completed the flaperon trim, now we are installing the strut fairings. This is turning out to be an interesting addition, figuring out how to set the correct angles and lock the fairings in place, so far so good made good progress today on the front one of the left wing. Friday will be another day, weather is supposed to be nice after all the rain.

Added by Phillip Owens on August 10, 2009 at 7:53pm — No Comments

Which one of these men is building a CH701?

Zenair News reporting staff had an opportunity to visit the new tower at Oshkosh during the show, thanks to a CH701 builder that works for the FAA.
Story in the next Newsletter (Issue #174)

Added by Zenair News on August 4, 2009 at 11:58pm — 2 Comments

Overflow Crowd at Zenith Builder's Dinner - Oshkosh



Over 200 Zenith builders and family members attended the builder's dinner last week. Our dinner room was a little too small for that number, but everyone adapted to the situation and enjoyed the company of their fellow builders. Mark Townsend (Can-zac Aviation, below) was our MC and did a great job of keeping the evening rolling with a multi-media presentation and acknowledgement of achievements made by attendees.…



Continue

Added by Zenair News on August 4, 2009 at 5:53pm — No Comments

Zenair Issue #173 on way to Post Office



Featured in the new Zenair Newsletter being mailed this week is Vince Butner - a prolific builder that is working on building his seventh Zenith kit ! That's correct: he has built 6 Zenith aircraft kits and is working on his seventh kit. Not a professional builder - but just a person with a passion for building airplanes. We caught up with him at the recent Open House Fly in at the Zenith factory in June. A complete interview, where he shares… Continue

Added by Zenair News on August 3, 2009 at 9:09pm — 1 Comment

Rivit Spacing

I'm up to lay out for the rivit line for the elevator hinge. The 40 pitch works out between the ribs. But outside the last rib to the end rib I ended up with 34 pitch to evenly space the last two rivits to the end of the hinge. Then 37 to get even spacing for the 5 from the end of the hinge to end rib. If anyone knows if this is something that will come back to bite me please speak up. I know the 37 is with tolerance set in the construction guide. I'm wondering about the 34. Stopped there for… Continue

Added by Richard Rost on August 2, 2009 at 9:40pm — 1 Comment

Orcas Island Adventure

6/30/09 What a great place to visit! Orcas Island is a picturesque little community North of Seattle. There are a number of B&Bs and small hotels within walking distance of the airport. But you might consider parking in the overflow grass area and camp with your plane. Have dinner at Lulu's. Highly recommended.

Added by Russ Bens on August 2, 2009 at 4:30pm — No Comments

Thanks to all who sent me congratulations

It sure felt great flying my bird that many of you helped me build.

Today, we re-pitched the prop so it will turn up to 3300 rpm. It would only turn up to 2350 when I flew the other day.

What surprised me, most of all, that the temperatures seem to stay within boundaries.

Also, the carb linkage was adjusted so the engine won't die when I pull the throttle back too far on my next landing.

BTW, does the two or three bounces count as two or three landings?

102 degrees kept… Continue

Added by Mack P. Kreizenbeck on August 1, 2009 at 10:51pm — 2 Comments

Another 601XL takes to the air!

I finally did it!



I flew N990MK maidens flight yesterday and everything went well!



No, the wings did not fall off!



All the bantering back and forth about the safety of the 601s had me quite concerned, so much so that my airplane, signed off by a DAR 19 months ago, had to be annual-ed before its first flight.



The most recent letter from the FAA put my mind at ease.



A few minor adjustments and its back off into the wild blue yonder.…

Continue

Added by Mack P. Kreizenbeck on July 31, 2009 at 11:00am — 3 Comments

Monthly Archives

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

1999

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service