Online Community of Zenith Builders and Flyers
Here's my report of the 2019 Sun 'n Fun fly-in earlier this month (April 2 - 7) in Lakeland, Florida, with photos and videos of the trip to and from Lakeland from the…Continue
I have a dual throttle setup on my 701 with a Rotax 912ULS This is the kit that zenith provides with two cables. There seems to be a lot of pressure pulling the two throttle arms on the carbs back to full. If I take my hand off the throttle it will advance the RPM greatly. I have to tighten the throttle lock down very hard to stop this action. Rotax says not to change the carb springs. I took the springs off to see if it was a cable issue , but no problem with the cables. I did reattach the…Continue
Everyone please congratulate John Heather on his first flight with his Viking powered Zenith…Continue
Zenith 601XLB 2850cc Corviar powered Michigan to Florida in one day.
March 26, 2019 I flew from Michigan to Venice Florida KVNC and parked on the
ramp by Suncoast Air Center. Had good weather and tail winds till I got
in Florida, average speed 117mph or 102kts, not bad for a 601XLB. Stop by
and take a look, I’m trying to find it a new home.
I stopped off at Cook County and said hi…
How much friction / how free should the main flap control tube be on a 750 when fitted I don’t want to rivet it just in case. I can turn it by hand without much effort but is not free like in a normal baring. thanks
Realizei o pedido do material através do representante no Brasil: http://www.aviacaobr.com.br/
Estou aguardando o pedido chegar.
A última informação recebida foi que o pedido já foi despachado pela Zenith.
I made the request of the material through the representative in Brazil: http://www.aviacaobr.com.br/
I'm waiting for the request to arrive.
The latest information received…
Added by Disney Martins de Melo on March 26, 2019 at 7:44am — No Comments
Had Todd Davis from the Milwaukee FSDO come to do my airworthiness inspection this AM. Super nice and super helpful!Thank you both FAA and EAA for the great documentation and support. WOW!
Todd Davis from the Milwaukee FSDO come to do my airworthiness inspection this AM. Super nice and super helpful! Thank you both FAA and EAA for the great documentation and support. WOW!
Added by Mark Baenen on March 19, 2019 at 8:30pm — No Comments
Added by Jan Eggenfellner on March 8, 2019 at 9:00pm — No Comments
Things are finally coming together.20190307_165135.jpg
For anyone just starting out or almost finished, I HIGHLY RECOMMEND the EAA's Amateur Built Certification Kit. It has all the forms, all the steps and all the right language to make getting your paperwork done correctly very easy. It also has good recommendations on the timing to send the various forms in. SUPER helpful!
Added by Mark Baenen on March 6, 2019 at 2:47pm — No Comments
I am looking for a larger rubber seal for the front of my canopy. Trim Lock DD1201 has been suggested, but a 25 foot piece sells for $80. I was wondering if someone had a leftover 8 foot piece that they would be willing to sell.
I am currently finishing up with the wing mod on a friends 601XL and have a 601 partial build waiting in storage. I have
built a RV-8 which I sold and had a Cassutt for a few years. I worked for the Oklahoma Air National Guard for forty years and retired from Air Force with 43 years, 8 months and 23 days service. I was always in aircraft maintenance and flew for
13 years as flight engineer on C-97 =C-124 aircraft. All my other time was on fighters F-51, F=80, F=86D,…Continue
Added by arthur l saunders on March 4, 2019 at 7:46pm — No Comments
My nose bowl finally arrived and I spent the weekend fitting the cowling panels - very nice fitting setup from the Weseman's. After that, I finished up my paperwork and sent it off to the FAA. Got a call last week and set the date for the Airworthiness Inspection! - March 19th!…Continue
From what I have seen, moving a wing skin tends to be a two person operation. The video
below is a demonstration of a vacuum lifting frame I constructed to allow one person to
easily moving a wing skin between a worktable and the wing skeleton.
Added by Matthew brumby on February 21, 2019 at 4:34am — No Comments
Several months back I had posted that I was experimenting with using a project management software package called Jira to help manage tasks in my scratch build. After about 6 months of use I think I can say it has been very helpful for tracking what I have done, what I am currently doing and what still remains.
While I am building my aircraft from plans, I think Jira would also be helpful for kit builders as well.
The video below is a demonstration of how Jira…Continue
Added by Damon Brantley on February 13, 2019 at 10:01pm — No Comments