Marvin W Miller's Posts - Zenith Aircraft Builders and Flyers2024-03-29T07:40:03ZMarvin W Millerhttps://zenith.aero/profile/MarvinWMillerhttps://storage.ning.com/topology/rest/1.0/file/get/2197103023?profile=RESIZE_48X48&width=48&height=48&crop=1%3A1https://zenith.aero/profiles/blog/feed?user=0dewskn2vd589&xn_auth=noADS-Btag:zenith.aero,2015-08-01:2606393:BlogPost:4456452015-08-01T19:25:53.000ZMarvin W Millerhttps://zenith.aero/profile/MarvinWMiller
Should have posted this earlier, a few months ago I installed ADS-B in and out in my 650. Got the UAT and Wifi setup from SkyVision. Connects to my ipad. At a glance its easy to see if a plane is above or below you, and which way it's going. 3-D view. Harry the tec at SkyVision is the most helpful and quick reply with help and answers. So far a few planes are using ADS-B. But more and more. Love it.
Should have posted this earlier, a few months ago I installed ADS-B in and out in my 650. Got the UAT and Wifi setup from SkyVision. Connects to my ipad. At a glance its easy to see if a plane is above or below you, and which way it's going. 3-D view. Harry the tec at SkyVision is the most helpful and quick reply with help and answers. So far a few planes are using ADS-B. But more and more. Love it.brake lines to spring geartag:zenith.aero,2012-12-15:2606393:BlogPost:2544522012-12-15T01:28:17.000ZMarvin W Millerhttps://zenith.aero/profile/MarvinWMiller
<p>brake lines to the spring gear, I ground the 5mm part off. used 3m car moulding tape, clamping them for awhile for a good stick. The clips are tough plastic. clips and fastners .com part # A14321 box of 25 costs $6.97. red brake line Truck Spring.com part #451030A $.40pf</p>
<p>brake lines to the spring gear, I ground the 5mm part off. used 3m car moulding tape, clamping them for awhile for a good stick. The clips are tough plastic. clips and fastners .com part # A14321 box of 25 costs $6.97. red brake line Truck Spring.com part #451030A $.40pf</p>One Year progress reporttag:zenith.aero,2012-09-14:2606393:BlogPost:2380382012-09-14T22:16:47.000ZMarvin W Millerhttps://zenith.aero/profile/MarvinWMiller
<p>One year ago, 9/11/11, I stopped at the factory and picked up a rudder kit.Then I did the unthinkable I ordered a whole kit.CH 650 B</p>
<p>I got the wings, rudders,elevators, done and test fitted, flaps and ailerons done,the rear fusalege is riveted and the front I am in process of riviting. All deburred. Engine ordered from Viking for Dec. delivery I know I got a long way to go but happy where I'm at.</p>
<p>One year ago, 9/11/11, I stopped at the factory and picked up a rudder kit.Then I did the unthinkable I ordered a whole kit.CH 650 B</p>
<p>I got the wings, rudders,elevators, done and test fitted, flaps and ailerons done,the rear fusalege is riveted and the front I am in process of riviting. All deburred. Engine ordered from Viking for Dec. delivery I know I got a long way to go but happy where I'm at.</p>