Ronald W. Gorsline
  • Male
  • Williamston, MI
  • United States
Share on Facebook

Ronald W. Gorsline's Friends

  • Robert Schneck
  • Robert Lemke
  • Michael Chesney
  • Peter Bowen
  • Mike Chekal
  • Marvin W Miller
  • Jerry VanNuil
  • Damon Brantley
  • Jim Snyder
  • John Edwards
 

Ronald W. Gorsline's Page

Profile Information

Aircraft Model
ZODIAC CH 650
Project Status
Less than half
Building From
Kit
Building Experience
No Experience
Flying Experience
Private Pilot
Building and Flying Info / Your Profession / Other Background Info
General Motors Powertrain Engineering, Milford Proving Grounds.
Lab. Tech. Noise and vibration, Mechanical background

Ronald W. Gorsline's Photos

  • Add Photos
  • View All

Ronald W. Gorsline's Blog

A cheap aircraft hoist

Posted on August 19, 2016 at 7:17am 3 Comments

My Zenith builder partner and I were looking for a cheap way to house our 750 and 650 aircrafts in a single hangar and save some expense, this is our solution built from a modified Harbor freight lift table.  The 750 is lifted high enough to roll the 650 under the wing and then lowered again.  The table is rated for 1000 lbs. and raises our planes 18" off the floor, we have…

Continue

Comment Wall (2 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 7:52pm on December 16, 2011, Marvin W Miller said…

Well I just got my kit, and was building the ailerions. yes 10 weights on each one is also what I came up with just by holding it where it would be fastened.  The 1st part I was going to make was the elevator but was missing 4 pcs. The spar doublers. So I started on the ailierons instead. being missing those peices I decided to do a complete inventory check off list. That is all I was missing.

  I do agree it is a challange. I noticed the disc does not contain everything. I figure like this.  1st. use the inventory list to get all the parts together to make whatever part Your making. Familerise myself with those parts then use print and disc to see how they go together. Using the inventory list, that way we don't miss anything.

At 6:44pm on March 18, 2011, Bill Carter said…

Welcome to the family.

I wish you the all the best with your project.

If you ever get the chance to visit the Zenith factory please take the time to stop by our builder assist facility too. We like to have visitors here and we are right here in Mexico, Mo. just a couple of miles from them.

Take care and good luck,

Bill Carter

American Light Sport Aircrafters Builder Assist & Assembly Center

www.LightSportAircrafters.com

 

 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service