Roger Pearce
  • Maupin, OR
  • United States
Share on Facebook
Share
  • Blog Posts
  • Discussions (55)
  • Events
  • Groups
  • Photos
  • Photo Albums
  • Videos

Roger Pearce's Friends

  • Dennis Mitchell
  • Bill McLagan
  • Eric Stacey
  • Jon Ramos
  • David Buoy
  • Paul LaPlante
  • Patrick L. Hatfield
  • Norm Carrigg
  • Bob Wood
  • Jack Rock
  • Ken Szewc
  • Terry Hagel
  • David Orr

Roger Pearce's Discussions

A65 exhaust flange

Started this discussion. Last reply by Roger Pearce Mar 22. 3 Replies

Two of my exhaust flanges are too pitted and warped to be repaired, and after pricing stubs on ACS ($89.75 ) and also bare flanges ($13.50) I started looking around to see what I could use.  Being a…Continue

 

Roger Pearce's Page

Latest Activity

Roger Pearce posted a discussion

A65 exhaust flange

Two of my exhaust flanges are too pitted and warped to be repaired, and after pricing stubs on ACS ($89.75 ) and also bare flanges ($13.50) I started looking around to see what I could use.  Being a former air cooled VW/ Porsche mechanic I have lots of VW parts around and discovered that the exhaust flanges are the exact same size as the Continental, in inside diameter, stud hole center to center and stud hole diameter.  Go figure.  So, if you are building an exhaust system, like I am, and need…See More
Mar 17
Paul LaPlante left a comment for Roger Pearce
"Hey Rodger I have put a hold on my build because we bought property in Pine Hollow and I am working on getting it ready to build a shop and a house but once I get all moved over here I will get back on it. I would love to see your build. If you want…"
Jun 10, 2018
Norm Carrigg left a comment for Roger Pearce
"Roger: Another thing we have in common... You used to be a Porsche mechanic, and I drive a Porsche! I've got a pristine 986 Boxster, and I'm on the lookout for a 997 Carrera S Coupe sometime in the not too distant future... Norm"
Feb 23, 2018
Norm Carrigg left a comment for Roger Pearce
"Hi Roger: Glad to hear that you are building a CH-701! I am embarrassed to admit that I never got past the rudder on my 701 project. I did that part in a workshop out at the zenith plant in the previous millennium. In the meantime, life got in the…"
Feb 23, 2018

Profile Information

Aircraft Model
STOL CH 701
Project Status
Less than half
Building From
Kit
Engine installed (or plan to install)
Continental - other
Building Experience
No Experience
Flying Experience
Private Pilot
Building and Flying Info / Your Profession / Other Background Info
Low hours, got Canadian private lic. in 1972
Retired law enforcement, previously spent 20+ yrs as VW/Porsche mechanic
Home Airport (ie. KMYJ)
1000 foot one-way home airstrip

Comment Wall (8 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 10:42pm on June 10, 2018, Paul LaPlante said…

Hey Rodger I have put a hold on my build because we bought property in Pine Hollow and I am working on getting it ready to build a shop and a house but once I get all moved over here I will get back on it. I would love to see your build. If you want to call me 503-348-7907 Thanks

Paul LaPlante

At 9:03pm on February 23, 2018, Norm Carrigg said…

Roger:

Another thing we have in common... You used to be a Porsche mechanic, and I drive a Porsche! I've got a pristine 986 Boxster, and I'm on the lookout for a 997 Carrera S Coupe sometime in the not too distant future...

Norm

At 8:55pm on February 23, 2018, Norm Carrigg said…

Hi Roger:

Glad to hear that you are building a CH-701! I am embarrassed to admit that I never got past the rudder on my 701 project. I did that part in a workshop out at the zenith plant in the previous millennium. In the meantime, life got in the way and I wound up being busy with a zillion other things and never got back to it.

Now however, I am about to order a full STOL CH750 kit and go to work on it this year. I'll initially be building it up in Everett, Washington, where I'm working right now. But I still have my little place in Enterprise (right below the airport!) and another in Heppner. So I am looking forward to getting back to Eastern Oregon before long, and some doing some fine bush piloting in my favorite part of the state.

Norm

At 1:15pm on February 24, 2017, Eric Stacey said…

Small world.

At 10:29am on February 21, 2017, Eric Stacey said…

Roger...  Maupin is great.  I spent a summer at the Carver Ranch there, shooting a movie, "Purple Mind."  That's what I used to do.  Now I'm a Zenith builder, stuck waiiting for my finishing kit to ship.  Fuselage, wings, HS & VS done.  Just did overhaul on a Great Plains VW Type 4 I picked up from an EAA guy in our group, but feels like I'm standing still.  Sounds ideal with your 1,000 foot home strip.  Not sure where or when I'll hangar my plane.  Trying to do as much as possible in the garage before trailering my whole shop to a hangar - perhaps Sandy River Airpark.  We'll have to do a meetup once the weather takes a turn for the better.

Cheers

At 3:41pm on February 20, 2017, Eric Stacey said…

Hi Roger.  I'm a year into building my 701.  Glad to learn there's another 701 somewhere here in Oregon.  I'm in Gresham, just east of Portland.  Belong to EAA 902 out of Mulino near Canby.  Check in if you're anywhere in the area.

Best,

Eric Stacey

503-666-2325

At 2:55pm on February 20, 2017, Terry Hagel said…

The 701 is a great plane and I enjoyed building it and now, flying in it.  If you have any questions, let me know and I will try and help.  

I went to the factory build school and thought it was pretty good - - however, it didn't teach me enough about taking rivets out!

Terry

At 1:40pm on February 20, 2017, Jon Ramos said…

Roger,

I am not an owner/builder at this time. I am still stuck on the Zenith/Kitfox fence! I am, however, pretty darn close by at the Northern end of Sherman County between Rufus and Wasco. Congratulations on taking the plunge! If you happen to find yourself in need of any free labor, give me a call. I am worth every penny...

Take care and have fun,

Jon Ramos

541-442-5781 Day

jonr@mcgg.net

 
 
 

New from Zenith:

Zenith Aircraft For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

 

Zenith transition and Sport Pilot training:

Quality Sport Planes
Cloverdale, California:

Wheels & Wings

Pro Builder Assistance

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service