Rodger Clarke
  • Male
  • Rosebrook, NSW
  • Australia
Share on Facebook

Rodger Clarke's Friends

  • Graham Kingaby
  • Steve
  • Robin Hilliard
  • Gordon Watkin
  • Allan / Zenair Australia
  • Chumphol Sirinavin
 

Rodger Clarke's Page

Profile Information

Aircraft Model
STOL CH 701
Project Status
Nearly done
Building From
Plans-only
Engine installed (or plan to install)
Rotax 912
Building Experience
No Experience
Flying Experience
Commercial / CFI
Building and Flying Info / Your Profession / Other Background Info
Airline Pilot
Ex military

Rodger Clarke's Photos

  • Add Photos
  • View All

Comment Wall (4 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 5:34pm on July 7, 2015, Graham Kingaby said…

Good to see you at Maitland Rodger, and look forward to seeing you in the air soon :-)

Cheers

Graham

PS Love the camouflage job

At 6:30am on October 10, 2012, Allan / Zenair Australia said…
Well done Rodger as you get more done the more you get into it
Cheers Allan
At 7:20am on February 11, 2011, Chumphol Sirinavin said…
77 mm. and 151 mm. are measured from the side of my fuselage, 77 mm. being from the top of Rear Wing Attachment (7F5-1).
At 6:52am on February 11, 2011, Chumphol Sirinavin said…

Hi Rodger,

 

For the rear part of the new main wing ribs, I keep it pretty much the same as the old profile, adjusting the little triangle at TE. At first, I got the new wing chord 18 mm. short. Now, maybe, it's 1-2 mm longer.

 

Since my airplane was completed and flown before wing re-build, I keep the flaperon hinge line in its original position. SInce you are building from plans only and I haven't seen how far you are in building the wings, I will suggest this: Build the wings, Install the wings, Determine the hinge position.

 

Draw Wing Rear Rib (7V1-2), using paper template, on a piece of plywood. Draw Flaperon Bracket (7V4-6) and Flaperon Arm (7V4-7), also using paper templates on the same plywood just as they are assembled correctly to 7V1-2. Mark the pivot hole for flaperon hinge. Now, you can use the drawing on this plywood piece as a jig to assemble the NEW flaperon arm to each wing rear rib and have the holes for hinge pin all in-line. As a matter of fact, I got the shape of my new flaperon arm from this finished drawing on plywood.

 

After you install the wings on the fuselage, complete with wing struts, you can bore-sight through hinge holes on flaperon arms of each wing and mark the spot on the fuselage for the Root Hinge Pin (7A2-4). In doing this, some use laser pointer, some use small steel tube, while many simply use Eyeball MK-1 and walking back and forth (working alone) to mark the exact position.

flaperon%20arm%20and%20hinge%20line.jpg

 

I hope this helps you some. More questions are welcome.

 

Champ

 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service