"I see you are a couple hours north of me.
If your down this way stop in to CFY4."
Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
-
Lawrence A Anderson
- Stony Plain AB
- Canada
- Blog Posts
- Discussions (51)
- Events
- Groups
- Photos
- Photo Albums
- Videos
Lawrence A Anderson's Discussions
exhaust stud bolts
Started this discussion. Last reply by Joe Hopwood Feb 7, 2018. 1 Reply 0 Likes
When installing new exhaust stud bolts in lycoming engine should I lock tight the new bolts in and should I use blue or red locktight or an anti seize such as permatex?Continue
wanted to buy
Started Jul 19, 2017 0 Replies 0 Likes
Wanted to buy oil cooler adapter to fit between Casper labs oil filter adapter and engine to run oil cooler lines to oil cooler. Also need an oil cooler.Continue
Lawrence A Anderson's Page
Latest Activity
Harley McCartney left a comment for Lawrence A Anderson"Oh 750. I would recommend you do some research on Corvair engines.
When I built my plane I used an 0360 lyc. because it is easy to get parts it is a common engine. Mounts and accessories are also easy to get. Check out Rotax."
Lawrence A Anderson posted a discussionexhaust stud bolts
When installing new exhaust stud bolts in lycoming engine should I lock tight the new bolts in and should I use blue or red locktight or an anti seize such as permatex?See More
Lawrence A Anderson posted a discussion750 STOL WEIGHT
Does anyone know the weight of a 750 STOL without engine or paint. This would make it easier to decide possible engine choices.See More
Lawrence A Anderson posted a discussionFuel for viking engines
What fuel are people using successfully in the Viking 130 hp engines? I am building a 750 STOL getting closer to deciding on engine. Thanks Lawrence AndersonSee More
Lawrence A Anderson posted a discussionFranlin engine
Has anyone had any experience with a Franklin engine on a Stol 750? Are there motor mounts available and other parts? Model looking at is 4A-235 125 HP. Lawrence AndersonSee More
Lawrence A Anderson posted a discussionengine choice
Is there anyone flying in Alberta Canada with the Corvair or the Viking engine. I would like to see one . live near Edmonton AB but could drive to see different engines Lawrence AndersonSee More
Jan Eggenfellner left a comment for Lawrence A Anderson"Not sure about it but by far the best place to ask is on our forum"
Lawrence A Anderson posted a discussionengine choice
Still trying to decide engine type. Looking very seriously at Azalea corvair conversion. Just seems to be so hard to get a straight answer out of WW/ SPA as to final price on complete engine and firewall forward. Whereas azalea Bill Clapp seems to be so easy to talk to and straight forward about his prices. Does anyone else have more comments on Azalea/ WW engines?See More
Lawrence A Anderson posted a discussionAzalea aviation
Anyone with experience with Azalea Aviation corvair engine conversions?Seems to have a lot of info on his site. Prices seem to be about the same as W Wynn engines so wandering if anyone has had any dealings with them. Lawrence Anderson.See More
Lawrence A Anderson posted a discussion750 engine choice
Wondering what experience people have had with a WW Corvair engine reliability, ease of service, fuel concerns [ do they burn avgas or mogas equally as well] Thanks Lawrence AndersonSee More
Profile Information
- Aircraft Model
- STOL CH 750
- Project Status
- Less than half
- Building From
- Kit
- Engine installed (or plan to install)
- Corvair
- Building Experience
- No Experience
- Flying Experience
- Sport Pilot (or Ultralight)
- Home Airport (ie. KMYJ)
- CZVL
Comment Wall (4 comments)
- At 9:52am on March 16, 2018, Harley McCartney said…
I see you are a couple hours north of me.
If your down this way stop in to CFY4.
- At 9:48am on March 16, 2018, Harley McCartney said…
Oh 750. I would recommend you do some research on Corvair engines.
When I built my plane I used an 0360 lyc. because it is easy to get parts it is a common engine. Mounts and accessories are also easy to get. Check out Rotax.
- At 9:38am on March 16, 2018, Harley McCartney said…
Hi Lawrence what model are you building
- At 11:56am on July 4, 2016,
Jan Eggenfellner said… Not sure about it but by far the best place to ask is on our forum
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.
Custom Upholstery Kits for your Zenith Aircraft:
Zenith Vinyl Upholstery Kits
Zenith Apparel from EAA:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
Zenith transition and Sport Pilot training:
Quality Sport Planes
Cloverdale, California:
Pro Builder Assistance
© 2019 Created by Zenith.Aero.
Powered by
