Joe DeKeyrel
  • Male
  • Leesburg, VA
  • United States
Share on Facebook
Share

Joe DeKeyrel's Friends

  • Tim Jones
  • Oscar Borsten
  • Terrence "Dr. Terry" Hall
  • Steve Barteau
  • Bernie Outram
  • Wayne Woloshin
  • Jimmy Young

Joe DeKeyrel's Discussions

AS5 Stainless Steel source

Started this discussion. Last reply by Gary Welch on Friday. 5 Replies

Has anyone identified a reasonable alternative to the AS5 rivet?Continue

 

Joe DeKeyrel's Page

Latest Activity

Joe DeKeyrel posted photos
12 hours ago
Joe DeKeyrel posted a status
"Closed up the Landing/Taxi lights and lens. Tested wiring/lights (NAV/POS/Strobes) and Landing/Taxi Lights. Riveted closed both wingtips."
12 hours ago
Joe DeKeyrel posted a status
"Windscreen fitted, drilled, and screwed in place (not final until avionics are in). Roof/Skylight drilled, and cleco'd."
yesterday
Joe DeKeyrel posted a status
"Cowl trimmed, fitted, and nut-plated. Passenger seat base, sliders, and seat pan mounted. Passenger door strut fixed. Prop pitch set."
Friday
Joe DeKeyrel posted a discussion

AS5 Stainless Steel source

Has anyone identified a reasonable alternative to the AS5 rivet?See More
Wednesday
Joe DeKeyrel posted photos
Feb 18
Joe DeKeyrel posted a status
"Dry fit of windscreen (should fit with no trimming). Final fit/mounting of flaperons. Aluminum baffles fitted, and cowling ready to drill."
Feb 18
Joe DeKeyrel posted a status
"Seat bases, sliders, pans. Mounted wings (final?), flaperons (initial). Part way through the cowl."
Feb 17
Joe DeKeyrel posted a photo

Prop installed

Had to install the spinner plate and prop hub anyway... why not check out the prop?
Feb 12
Joe DeKeyrel posted a status
"Found out last night I have to be out of my hangar in 16 days! Crazy days coming! Started fitting cowling & finished elevator control stops"
Feb 12
Joe DeKeyrel posted photos
Feb 10
Joe DeKeyrel posted a status
"Mounted the doors, sanded bubbles to fit. Marked, drilled and mounted the wing root fuel line bulkhead connectors."
Feb 10
Joe DeKeyrel posted photos
Feb 6
Joe DeKeyrel posted a status
"After priming and painting the steel bits, installed handle mounting plates, fore and aft latches, door-side strut fitting, and snap vents."
Feb 6
Joe DeKeyrel posted photos
Feb 2
Joe DeKeyrel posted a status
"Fitted bubbles to the frames, cut the top, drilled and cleco'd, hung on fuse and marked to fit. Very productive 24 hours!"
Feb 2

Profile Information

Aircraft Model
CH 750 Cruzer
Project Status
Nearly done
Building From
Kit
Engine installed (or plan to install)
UL Power
Building Experience
No Experience
Flying Experience
Private Pilot
Home Airport (ie. KMYJ)
KJYO

Joe DeKeyrel's Photos

  • Add Photos
  • View All

Comment Wall (1 comment)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 12:43pm on January 5, 2017, Wayne Woloshin said…
Hi Joe, I will be following your build as you go, I think I will be building the same a you are later this year. Good Luck and enjoy the build. Tks Wayne
 
 
 

New from Zenith:

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


New Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


New Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz.

Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

 

Zenith transition and Sport Pilot training:

Quality Sport Planes
Cloverdale, California:

Wheels & Wings

Pro Builder Assistance

© 2018   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service