Jason R
  • Male
  • Powasan
  • Canada
Share on Facebook
Share

Jason R's Friends

  • John Niemeyer
  • Mark Maltais
  • Greg Harris
  • Vance Lucas
  • Timothy D. McCall
  • Ken Talarico
  • Jerry Tolman
  • Normand Lambert

Jason R's Discussions

Which comes first....

Started this discussion. Last reply by Jason R Sep 28. 4 Replies

Good afternoon or morning or evening depending on where you are and when you read this :)I'm thick into making my form blocks for my 750 STOL.  Trying to decide the order of operations and when…Continue

Cortec corrosion primer

Started this discussion. Last reply by John A. Minatelli Aug 27. 7 Replies

After doing a bit of research, I'd like to use Cortec on the mating surfaces of my airplane where necessary.  My STOL 750 will eventually be on floats, so I'd like the peace of mind that this will…Continue

701 with Corvair..... under 1200lbs?

Started this discussion. Last reply by David Orr May 19, 2016. 1 Reply

I'm pondering my options.....Currently working on a Corvair conversion.  Does anyone have concrete numbers on installed weights in a 701?I'm wondering if I can install a Corvair and still make the…Continue

 

Jason R's Page

Latest Activity

Jason R posted a photo
Oct 3
Jason R posted a status
"Tail group forms complete, wing forms next"
Oct 3
Jason R posted photos
Oct 2
Jason R posted a status
"Wing rear ribs rough cut out and continuing final shaping/routing of form blocks :)"
Oct 2
Jason R posted a discussion

Which comes first....

Good afternoon or morning or evening depending on where you are and when you read this :)I'm thick into making my form blocks for my 750 STOL.  Trying to decide the order of operations and when making the final shape.I've rough cut the shape of the forms from 3/4" plywood.Should I router the 1/8" roundoff edges first, then sand the edges for "spingback" angles?Or, should I sand the springback angle edges then router the 1/8" roundoff edges?I'm thinking the first option makes the most sense as…See More
Sep 26
Jason R posted a status
"Finished cutting out and debur/sanding of my slat ribs and wing nose ribs. Also got my forming blocks started."
Sep 20
Jason R posted photos
Sep 11
Jason R posted a status
"Cut out, trimmed and deburred the slat and flapperon ribs today, really happy with the finish, can't wait to start bending on the forms!"
Sep 11
Jason R posted a status
"Made a knife from the Larry Zepp plans: ttp://www.zenith.aero/profiles/blogs/aluminum-knife-plans-in-pdf-format Seems to work really well!"
Sep 6
Jason R posted a status
"Made the trek to Aircraft Spruce and escaped with some money still in my pocket. 0.032 and 0.040 aluminum too!"
Aug 31
Jason R posted a status
"Getting packed for the Brantford Community Charity Airshow. Oh did I mention it's at the same airport as Aircraftspruce.ca? Shopping time!"
Aug 28
Jason R posted a discussion

Cortec corrosion primer

After doing a bit of research, I'd like to use Cortec on the mating surfaces of my airplane where necessary.  My STOL 750 will eventually be on floats, so I'd like the peace of mind that this will provide and I really like the low VOCs and having it dry clear.Problem is, I can't seem to find where to purchase small quantities.  I've been having an e-mail discussion with the Canadian distributor who tells me the smallest quantity they will sell is a 5 gallon pail.... at $100/gallon!Apparently…See More
Aug 22
Jason R posted a status
"Ordered some .032 and .040 sheet today!"
Aug 21
Jason R posted a photo
Aug 21
Jason R posted a status
"Tracing out my form templates onto 3/4 inch plywood... getting ready to form some tail group parts"
Aug 10
Jason R posted a photo
Aug 10

Profile Information

Aircraft Model
STOL CH 750
Project Status
Just started
Building From
Partial kit
Engine installed (or plan to install)
Corvair
Your website (about your aircraft...)
http://flyalmaguin.com
Building Experience
No Experience
Flying Experience
Private Pilot
Building and Flying Info / Your Profession / Other Background Info
Husband, father and 911 dispatcher. Long time pilot with a licence that burns a hole in my pocket where my student loan money used to be. First time aircraft builder. Looking to fly my own airplane.
Home Airport (ie. KMYJ)
CPE6

Jason R's Photos

Loading…
  • Add Photos
  • View All

Comment Wall (3 comments)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 3:07pm on June 28, 2017, Normand Lambert said…

Hi Jason,

Don't know yet IF I will move  the attach point outward... I know it has been done WITHOUT moving those around. I just want a LONGER wing for a lighter kg/foot2. The guys at STOLSPEED have done it and they did not move those, so for me, I would rather not move them. Still debating...

Regards,

Norm

At 2:28pm on September 26, 2016, Mark Maltais said…

Yeah it's sold, just hasn't been picked up yet due to bad weather...

At 4:59pm on September 25, 2016, Mark Maltais said…

Pretty much everything is going with the plane... I think I have some misc parts buried somewhere, but I'm in the middle of a move and it's all in a big disaster in my garage right now LOL

 
 
 

New from Zenith:

25th Anniversary: 1992 - 2017


Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


New Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


New Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz.

Builder & Pilot Supplies:

Zenith transition training

and Sport Pilot:

Quality Sport Planes
Cloverdale, California:

© 2017   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service