David McCusker
  • Male
  • Iva, SC
  • United States
Share on Facebook
Share

David McCusker's Friends

  • Russell Shimunek
  • James R Depfer Sr.
  • Steven Winn
  • Pat
  • Dane Smith

David McCusker's Discussions

Flygas intake manifold

Started this discussion. Last reply by Bill Alexander Feb 16, 2016. 7 Replies

Was wondering if anybody had experience with the fLygas intake manifold for the rotax 912 it has a very large crossover tube it's supposed to eliminate carburetor synchronization.

Engine runs rough when landing

Started this discussion. Last reply by Juan vega Dec 1, 2015. 6 Replies

Hey all my 912 rotax ul  runs rough when landing its ok above 3000 rpm. from 2200 to 3000 rpm its shakes on the ground. New plugs and wires sync. carbs not sure what to check  HELP!!!!Continue

 

David McCusker's Page

Profile Information

Aircraft Model
STOL CH 750
Project Status
Flying
Building From
Purchased finished aircraft
Engine installed (or plan to install)
Jabiru
Building Experience
Have worked on airplanes before
Flying Experience
Sport Pilot (or Ultralight)
Home Airport (ie. KMYJ)
KAND

David McCusker's Blog

Rotax running on after shut down

Posted on April 11, 2015 at 3:04pm 4 Comments

Hey all its me again Im tring to get the bugs worked out of this plane.   Does anybody know why my 912 rotax 80hp keeps running on for about 15 to 20 seconds after I turn the key off. My idol is around 1900 rpm at shut down but continues on at 350 rpm for a short time.  It just started doing this last week.  I sure could use some help.   Thanks again

Water temp Rotax 912UL

Posted on April 5, 2015 at 7:33pm 3 Comments

Hey all I have a 912 Rotax 80 hp anybody know what the max water temp is. And where do i install a temp sender thinking I might want a gauge for liquid temp. Thanks 

Prop Pitch

Posted on December 8, 2014 at 9:44am 3 Comments

Anybody have info on prop pitch I have a 80hp rotax 912 with GSC 3 blade wood 68 inch on my 701 with low RPM 4400 is max. Wondering what degree i should use at the tip for short field takeoff and more RPM. Thanks

Rudder Boots

Posted on November 5, 2014 at 6:30pm 4 Comments

Anybody know what I can use to cover rudder pedal arms in firewall maybe rubber boots cold air burrrrr

Comment Wall (1 comment)

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

At 7:30pm on September 25, 2014, Steven Winn said…

Nice looking SkyJeep!

 
 
 

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service