R.H. wing skeleton, clecoed...

Rating:
  • Currently 0/5 stars.

Views: 141

Comment

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

Comment by Bart mcCoy on October 12, 2012 at 2:12pm
I like the 10 foot idea. I'm 75% done on the horizontal and hope to get the wings by December as an early Christmas present. Thanks for the input! Keep up the good work looks good.
Comment by Brian A Manlove on October 8, 2012 at 3:23pm

The bigger challenge is the nose ribs - you have to trim some length off the first couple of ribs because of the beefed-up main spar - so I'm thinking about using a laser level to sight down the tooling holes... that should get them just about perfect.

Comment by Brian A Manlove on October 8, 2012 at 3:18pm

Bart,

I use 2 pieces of  2" x 10' x 11-gauge square steel tube.  Then I level those to each other, and make sure the front spar is sitting on one and the rear spar is sitting squarely on the other.  Then I check level before drilling skins.  Sighting down the spars, they are as straight as could be.  

I have to say - Zenith has really done a great job of engineering the spars & skins too.  My spars came completely pre-drilled to A5 rivet size for every single rib station... so there is quite literally no guesswork about positioning the ribs correctly.  When I laid my skins down, my center blue-lines were just about perfect on every single rib, with very little adjustment necessary. The skins laid down with absolutely no puckering.  My biggest challenge has been handling the skins by myself...

Comment by Bart mcCoy on October 8, 2012 at 2:04pm
How do you check for any type of twist in your wing? I'll be starting in November and think I need to build a new table. My current table is 8 ft x 4 ft

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service