Rear strut top fitting

Struts are relatively simple but a pain in the keister. The green arc on the fitting represents 16mm edge distance. Allowable is 14.2, but I was fudging thicker as possible. Because of the angle of the bracket on the rear channel I was getting interference with the bottom wing skin. Also had to drop the pilot hole down about 1.5mm on the bracket to allow for edge distance on the fitting.

Views: 60

Comment

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

New from Zenith:

25th Anniversary: 1992 - 2017


Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


New Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


New Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz.

Builder & Pilot Supplies:

Zenith transition training

and Sport Pilot:

Quality Sport Planes
Cloverdale, California:

© 2017   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service