Online Community of Zenith Builders and Flyers
The four rod ends i ordered from Vans did not fit the 1 1\2" push rod tubing I ordered. Had to spend some time on the lathe today making the bigger ones in the pic. It was alot easier ordering them..lol
Tags:
Comment
Jesse, I think it was set at about 22.5 degrees. Started at 45 then 30 then 25... until it looked the way a wanted. LOL
Nice work. I don't like to cut tapers in my lathe...... very time consuming. About 6 degree taper?
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers