Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
Warming up the C85
Comment
-
Comment by David Orr on January 9, 2017 at 9:57pm
-
Gabhan, I bought the 4" vent flange from Home depot, it fit perfectly over the heat vent output on the heater.
-
-
Joseph, I just blow the air towards the oil tank. I have a squeeze clamp that grabs the cowl flap to hold the hose up.
-
Comment by joseph aloof on January 9, 2017 at 1:38pm
-
hi david the end of the heater is connected to what on the engine side is the hot air just circulating under the cowl?? here in north fla,we saw cold temps my oil was about 30 deg took alot longer to start almost ran batt down??? thx joe
-
Comment by Gabhan Berry on January 9, 2017 at 1:26pm
-
Nice! May I ask, how did you attach the ducting to the heater?
-
-
Cold days up in Port Angeles, WA pre-heat is a must!
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers