Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
STOL CH 750 panel
Comment
-
Comment by Wayne Koski on January 30, 2015 at 6:05pm
-
I bent up some aluminum on my own. I wanted everything just a bit closer, so no bend in the top surface. I will put pockets in the sides to slide half sheet papers in. It is half an inch wider on each side so I can route all of the wires, fuel lines and tubes outside of the console.
-
Comment by Bryan Walstrom on January 30, 2015 at 11:42am
-
Wayne, is that the factory center console or of your own design? (Sides not installed yet possibly)
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers