1/4 inch vent line attached to top of 2 quart header tank

Views: 101

Comment

You need to be a member of Zenith Aircraft Builders and Flyers to add comments!

Join Zenith Aircraft Builders and Flyers

Comment by Bill Bear on July 28, 2021 at 4:51pm

I had a local welder fabricate it for me out of a piece of 3"X5" channel aluminum tubing.  The average length top to the bottom is 10 inches.  Had to cut a 12 inch length at an angle to fit in there.  Holds about 2.6 quarts fuel.  I just finished my unusable fuel test.  Acft at 17 degrees nose up.  One gallon unusable. .6 left wing and .4 right wing.  Flow rate will provide required pressures for gravity feed system (no pumps) up to max power requirements for up to 128 HP.  I'm happy with these results.

Comment by BVD on July 27, 2021 at 5:44pm

Where did you get that header tank?

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service