Online Community of Zenith Builders and Flyers
Manufacturing the wing spars (scratch building from plans)
Tags:
Comment
That's a good point! Unfortunately I already flanged this one, but I will take note of that with the center and other outboard wing spar. Thanks!
Just a point of interest here.This looks like the spar web for the 701. Roger at zenith had advised me NOT to flange the spar holes until after the spar caps are rivet. The ali does move around quite a lot when its flanged and also when marking out the spar for all attaching parts its much easier with the spar lying perfectly flat on the bench.
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero. Powered by
Exlusive online community for active builders and pilots of Zenith Aircraft kits (Chris Heintz / Zenair light airplane designs).
You need to be a member of Zenith Aircraft Builders and Flyers to add comments!
Join Zenith Aircraft Builders and Flyers