My brother picked up my 750 STOL and his 750 SD kits from Zenith few weeks ago and we starting our build. So far we build horizontal stabilizers and working on elevators. We need to order some supplies from ACS like 426AD rivets nut plates, wires to run in wings for lighting some piano hinges and what else? 

 Dos anyone have suggestion what wire and how much do i need. What else do i need to order.

Thanks.

          Chester.  

Views: 337

Reply to This

Replies to This Discussion

No two builds are exactly alike, and it's really up to you how you do yours. You can look up the standards from the FAA for reference (don't have that handy), and a Google search can give you more info to go on (https://www.google.com/search?q=wing+wiring). There'a a ton of stuff on Van's aircraft that is easily transferable to other homebuilts. Then decide how to proceed with yours. Some use conduit and some don't. It makes wiring easier, but it could add a couple of pounds to your empty weight. Personally, I'd go with shielded wire, especially for your strobes, to prevent interference issues with other systems. I'd give some personal insights but I haven't gotten to that point in my build yet.

Thanks Bob. I'm thinking conduit may not be a bad idea. Has any one done it on Zenith?  Any pictures?

You need to take shielded wire for strobes. Refer to installation manual of strobe manufacturer to avoid noise. Use light conduit, there might be a day you regret it if not

 I have not decided on brand of lights i will install, I just want to run wire inside a wing for time when i need it.

I was thinking  18 gauge 4 conductor shielded wire, (ground position strobe landing)  

For Aeroled's pulsar you need 20 gauge. You can use 4 conductors for following functions:

- strobe

- landing

- nav

- strobe sync (syncs the two strobes)

and use shield as ground

In my opinion it is better to run an extra conductor for ground and attach the shield at one end to the common ground. 

Do not use the airframe at all for any electric installation. It might possibly add noise. Run always separate ground conductor to common ground.

http://www.aeroelectric.com/articles.html  A really good website for wiring and tips.  Also his book is an aircraft wiring bible.

Thank you for the link, This should keep me busy for while.  

Thanks Mark.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service