Wing tip to spar and rear channel attachment - Zenith Aircraft Builders and Flyers2024-03-29T10:35:23Zhttps://zenith.aero/forum/topics/wing-tip-to-spar-and-rear-channel-attachment?commentId=2606393%3AComment%3A528546&x=1&feed=yes&xn_auth=noThanks for the reply, i did s…tag:zenith.aero,2016-09-27:2606393:Comment:5285462016-09-27T17:36:39.623ZMichael W Mallockhttps://zenith.aero/profile/MichaelWMallock
<p>Thanks for the reply, i did slide them in tight to the supports, but then didn't like the look or fit, at least on my build, it's good to know the factory planes are done both ways!</p>
<p>Thanks for the reply, i did slide them in tight to the supports, but then didn't like the look or fit, at least on my build, it's good to know the factory planes are done both ways!</p> You may be able to put the wi…tag:zenith.aero,2016-09-27:2606393:Comment:5288042016-09-27T17:30:36.334ZJohn Burnshttps://zenith.aero/profile/JohnBurns
<p>You may be able to put the wing tip in tighter to meet these tip supports. Mine fit in tight to the L angles after some trimming. Link to the picture <a href="http://www.zenith.aero/photo/wing-tip-ready-to-install" target="_blank">Wing tip ready to install</a></p>
<p></p>
<p>I did not rivet the wing tip to the l angles. If you look at the Zenith factory planes they have done it both ways.</p>
<p></p>
<p>There are more details on my page. You may want to post a picture of your current…</p>
<p>You may be able to put the wing tip in tighter to meet these tip supports. Mine fit in tight to the L angles after some trimming. Link to the picture <a href="http://www.zenith.aero/photo/wing-tip-ready-to-install" target="_blank">Wing tip ready to install</a></p>
<p></p>
<p>I did not rivet the wing tip to the l angles. If you look at the Zenith factory planes they have done it both ways.</p>
<p></p>
<p>There are more details on my page. You may want to post a picture of your current fit.</p>