Hi,Is it very hard to take off the wings on a CH650 so I could put it in my garage for storage?..Thanks

Views: 225

Reply to This

Replies to This Discussion

I've not taken mine off yet, so take this with a grain of salt, but I can't imagine it taking less than a day's work to get them off, and another day to put them back on, so you would only want to do it for long-term storage.  My other concern would be that hammering out the spar bolts could lead to damaging the spars or egging out the spar bolt holes which would be a serious problem. 

I will try to do  more research on this,I know the rv12 can be removed with ease.

I may change my mind and build a CH750,but the  650 looks a lot cooler.>>>Thanks

I just took one wing of my 601 yesterday.  I'm still building and found an issue that required the removal of 1 wing.  About 4 hours to get it off, without unhooking any wiring or plumbing and about 6 hours today to get it back on.  The next time, if required would be quicker, but just let me say that getting interference fit bolts out when you can't get to the back of them to tap them out is a huge pain.

To get the wing back in, I had to loosen the through bolt of the carry through spar.  If you didn't install the wings initially, you will need tapered pins to locate the holes to reinsert the bolds.  These can be made with a grinder, drill press, file and emery paper from hardware store 5/16 bolts.  Not that if you carry through spare was make just a touch wider than spec, get the wing back in may be a LOT easier than what I experienced today!

Ron

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service