Warp drive vs Ivoprop - Zenith Aircraft Builders and Flyers2024-03-29T15:00:30Zhttps://zenith.aero/forum/topics/warp-drive-vs-ivoprop?commentId=2606393%3AComment%3A865213&feed=yes&xn_auth=noI fly a 701 out of a strip wi…tag:zenith.aero,2022-04-03:2606393:Comment:8652352022-04-03T02:22:44.067ZChris Beebehttps://zenith.aero/profile/ChrisBeebe
I fly a 701 out of a strip with decomposed granite. I have a three blade warp drive prop with nickel leading edges. All I can add is the nickel edges are mandatory in my application. The blades suck up all sorts of rocks and debris. Even at idle speeds.
I fly a 701 out of a strip with decomposed granite. I have a three blade warp drive prop with nickel leading edges. All I can add is the nickel edges are mandatory in my application. The blades suck up all sorts of rocks and debris. Even at idle speeds. 912 ULS 701, 10 " prop cleara…tag:zenith.aero,2022-04-02:2606393:Comment:8652132022-04-02T04:29:37.704ZPerry Delanohttps://zenith.aero/profile/perrydelano
<p>912 ULS 701, 10 " prop clearance. You might query the Rotax Owners site</p>
<p>that is where I got a lot of good feedback. Great service</p>
<p>from Whirlwind.</p>
<p>912 ULS 701, 10 " prop clearance. You might query the Rotax Owners site</p>
<p>that is where I got a lot of good feedback. Great service</p>
<p>from Whirlwind.</p> Sweet, ill check them out ! t…tag:zenith.aero,2022-04-02:2606393:Comment:8650452022-04-02T00:45:27.466ZDavehttps://zenith.aero/profile/Dave669
<p>Sweet, ill check them out ! thanks ! What engine are you running? ch701 or 750? </p>
<p>Sweet, ill check them out ! thanks ! What engine are you running? ch701 or 750? </p> Planning the same type of fly…tag:zenith.aero,2022-04-02:2606393:Comment:8653312022-04-02T00:39:36.639ZPerry Delanohttps://zenith.aero/profile/perrydelano
<p>Planning the same type of flying, went with 70" Whirlwind .</p>
<p>No experience, but got good fredback on props.</p>
<p>Planning the same type of flying, went with 70" Whirlwind .</p>
<p>No experience, but got good fredback on props.</p>