I have finished my 750 stol and I am waiting for the FAA Examiner. I wanted to know if anybody could tell me where they set their prop dimensions on the warp drive three-bladed with an O 235 Lycoming engine? Someone told me last year they said it at 10.5 degrees if somebody could verify that or give me more information I would appreciate it.

Views: 164

Reply to This

Replies to This Discussion

Richard, contact Warp Drive Props, I called and talked with them on my engine and plane combination and it was spot on. CH701,Continental C85 set for 9 degrees. My static and max RPMS were on the money. To set your blade angle order a Wixey saw blade angle digital meter 20$, it works great to set the angle perfectly. Way better than the manual protractor from Warp. Just zero it out on the hub and then tape it to the end flat part of the blade. Super easy!


New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...


Weather Maps

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.

Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

Zenith Apparel from EAA:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2020   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service