Online Community of Zenith Builders and Flyers
I am ready to purchase a propeller, but before I purchase a new one I thought I would see if anyone had one they no longer needed or weren't using.
I have the SEA-2 hub on my O-235 C2C. Almost all the parts are back from Oklahoma so assembly will begin shortly.
It will be going on my 601 XLB, so the diameter cannot exceed 68 inches. 68/57 for fixed pitch is what am told through my investigations would be best suited for my application. If anyone has a 3 blade Warp Drive prop, I would be most interested in that option.
Thank you for any help or considerations.
I have a used 4 blade Warp Drive for $800
My cell to text or call is 812-767-3545
I hadn't considered a 4 blade prop. I assume the diameter is 68"? Any hardware/spinner? It's almost 9pm now. I'll send you a text tomorrow. What was it mounted on? Hours?
Hi Mike, I have a 68" 3 bladed fixed pitch with Nickel leading edges Catto prop with crush plate, hardware and spinner available wih SAE-2 pattern. This is for a 6" dia prop flange and has 7/16" bolts with 5/8" lugs. Let me know if interested and I'll send an email/phone# via friend request if you desire pics. I would like $2K but may possibly negotiate depending on shipping.
209-754-3553 or cattoprops.com
Glass/2XCarbon Composite 3-B #04143376
Diameter: 68” Pitch: 55” NLE Zenith 750
Engn 350iS 130HP DesignRPM 3300
Red Line RPM max. 3400
Torque: 25 ft lbs. 6” Crush Plate Required
Manufacture Date: September 2014
My lugs are 0.375 (3/8 inch). Was it on a 750 with the 350iS engine? Let me do some digging. Send me a friend request so I can see some pictures and any other data you have on it. My zip code is 52404.
I usually check this site each night.