Wanted- Propeller for my Lycoming - Zenith Aircraft Builders and Flyers2024-03-29T11:08:40Zhttps://zenith.aero/forum/topics/wanted-propeller-for-my-lycoming?feed=yes&xn_auth=noI hadn't considered a 4 blade…tag:zenith.aero,2022-06-21:2606393:Comment:8721532022-06-21T01:58:58.532ZMike Holderhttps://zenith.aero/profile/MikeHolder
<p>I hadn't considered a 4 blade prop. I assume the diameter is 68"? Any hardware/spinner? It's almost 9pm now. I'll send you a text tomorrow. What was it mounted on? Hours? </p>
<p>Thanks</p>
<p></p>
<p>Mike</p>
<p>I hadn't considered a 4 blade prop. I assume the diameter is 68"? Any hardware/spinner? It's almost 9pm now. I'll send you a text tomorrow. What was it mounted on? Hours? </p>
<p>Thanks</p>
<p></p>
<p>Mike</p> My lugs are 0.375 (3/8 inch).…tag:zenith.aero,2022-06-21:2606393:Comment:8719112022-06-21T01:55:39.377ZMike Holderhttps://zenith.aero/profile/MikeHolder
<p>My lugs are 0.375 (3/8 inch). Was it on a 750 with the 350iS engine? Let me do some digging. Send me a friend request so I can see some pictures and any other data you have on it. My zip code is 52404. </p>
<p>I usually check this site each night. </p>
<p>Thanks, Mike</p>
<p>My lugs are 0.375 (3/8 inch). Was it on a 750 with the 350iS engine? Let me do some digging. Send me a friend request so I can see some pictures and any other data you have on it. My zip code is 52404. </p>
<p>I usually check this site each night. </p>
<p>Thanks, Mike</p> Hi Mike, I have a 68" 3 blade…tag:zenith.aero,2022-06-21:2606393:Comment:8720292022-06-21T00:32:55.023ZDavid J. Beaulieuhttps://zenith.aero/profile/DavidJBeaulieu
<p>Hi Mike, I have a 68" 3 bladed fixed pitch with Nickel leading edges Catto prop with crush plate, hardware and spinner available wih SAE-2 pattern. This is for a 6" dia prop flange and has 7/16" bolts with 5/8" lugs. Let me know if interested and I'll send an email/phone# via friend request if you desire pics. I would like $2K but may possibly negotiate depending on shipping.</p>
<p>Cheers! Dave…</p>
<table>
<tbody><tr><td width="760"></td>
</tr>
</tbody>
</table>
<p>Hi Mike, I have a 68" 3 bladed fixed pitch with Nickel leading edges Catto prop with crush plate, hardware and spinner available wih SAE-2 pattern. This is for a 6" dia prop flange and has 7/16" bolts with 5/8" lugs. Let me know if interested and I'll send an email/phone# via friend request if you desire pics. I would like $2K but may possibly negotiate depending on shipping.</p>
<p>Cheers! Dave</p>
<table>
<tbody><tr><td width="760"><table width="100%">
<tbody><tr><td></td>
</tr>
</tbody>
</table>
</td>
</tr>
</tbody>
</table>
<p><em>209-754-3553 or cattoprops.com</em></p>
<p>Glass/2XCarbon Composite 3-B #04143376</p>
<p>Diameter: 68” Pitch: 55” NLE Zenith 750</p>
<p>Engn 350iS 130HP DesignRPM 3300</p>
<p>Red Line RPM max. 3400</p>
<p>Torque: 25 ft lbs. 6” Crush Plate Required</p>
<p>Manufacture Date: September 2014</p> I have a used 4 blade Warp Dr…tag:zenith.aero,2022-06-20:2606393:Comment:8718922022-06-20T16:11:24.820ZDan Pohlehttps://zenith.aero/profile/DanPohle
<p>I have a used 4 blade Warp Drive for $800</p>
<p>My cell to text or call is 812-767-3545</p>
<p>Dan</p>
<p>I have a used 4 blade Warp Drive for $800</p>
<p>My cell to text or call is 812-767-3545</p>
<p>Dan</p>