Has anyone heard or know of a reason not to mix turnbuckle hardware?

In my case I would like to use a long turnbuckle barrel with short turnbuckle ends.  It would save me from having to run new cable lengths for my rudder controls which I have initially rigged a bit too short.

All thoughts and input appreciated!!

Dave

Views: 285

Reply to This

Replies to This Discussion

You must of read that in the 43.13-1a and b standards manual? Or is that from zenith?
I don't remember reading that when rigging mine. Would be a good question for your a&p friend.
Doesn't make Amy sense it is a linear pull.

"Experimental" allows you to decide. however in the world of part 43. there are no requirements of matching ends, or length of barrel. Just don't allow any exposed threads and don't forget to pin or safety.

Roger -  It was my own problem solving thought and question and since the AC 43 did not specifically address the question, I thought I would pick the "collective forum brain."  I also posted on the EAA maintenance forum, lots of views but no replies.  The A&P guys I work with say it's not a standard practice they have seen, but will not commit to an answer either way yes or no as to acceptability.  I think it will be fine if I elect to do so.

Steve and Tara - Kinda what I was thinking, nice to have some input from other builders.  I am delighted and impressed to see your panel design concept!!  Unique build!!

Thanks all for the replies...Dave

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service