750 A/P servo mount kits - updated info (in bold) picture added - Zenith Aircraft Builders and Flyers2024-03-29T07:40:24Zhttps://zenith.aero/forum/topics/survey-750-a-p-servo-mount-kits?commentId=2606393%3AComment%3A832066&x=1&feed=yes&xn_auth=noAppreciate you taking on my…tag:zenith.aero,2023-01-05:2606393:Comment:8882212023-01-05T19:51:41.428ZPeter Skedsvoldhttps://zenith.aero/profile/PeterSkedsvold
<p>Appreciate you taking on my request for help, and you built them so fast, </p>
<p>The setup took awhile to get done ,but finally got Jason Smith at Aerotronics in Billings to get it all figured out, They love exp. AC and want to help. Could have never gotten it done without YOU and Aero . </p>
<p>It really does help, on the long flights, THANKS again !</p>
<p> Peter S. </p>
<p> …</p>
<p>Appreciate you taking on my request for help, and you built them so fast, </p>
<p>The setup took awhile to get done ,but finally got Jason Smith at Aerotronics in Billings to get it all figured out, They love exp. AC and want to help. Could have never gotten it done without YOU and Aero . </p>
<p>It really does help, on the long flights, THANKS again !</p>
<p> Peter S. </p>
<p> 750DT</p>
<p></p>
<p></p>
<p> Are any of the other servos, full authority?</p> Hi Dave,
I'd like to buy a se…tag:zenith.aero,2022-12-30:2606393:Comment:8879242022-12-30T22:33:18.981ZDavid Larsonhttps://zenith.aero/profile/DavidLarson
<p>Hi Dave,</p>
<p>I'd like to buy a set of these from you. I'll be using Garmin GSA 28 servos.</p>
<p>Thanks,</p>
<p>Dave Larson</p>
<p>412-378-0990</p>
<p></p>
<p>Hi Dave,</p>
<p>I'd like to buy a set of these from you. I'll be using Garmin GSA 28 servos.</p>
<p>Thanks,</p>
<p>Dave Larson</p>
<p>412-378-0990</p>
<p></p> David,
I would love to purch…tag:zenith.aero,2022-01-27:2606393:Comment:8600472022-01-27T04:19:31.316ZJeff Frankhttps://zenith.aero/profile/JeffFrank
<p>David,</p>
<p></p>
<p>I would love to purchase a set for Garmin GSA 28 servos for my CH750 STOL.</p>
<p></p>
<p>Jeff Frank</p>
<p></p>
<p>David,</p>
<p></p>
<p>I would love to purchase a set for Garmin GSA 28 servos for my CH750 STOL.</p>
<p></p>
<p>Jeff Frank</p>
<p></p> Nice work Dave! I'm planning…tag:zenith.aero,2021-10-26:2606393:Comment:8513762021-10-26T12:46:56.426ZDavid Frydayhttps://zenith.aero/profile/DavidFryday
<p>Nice work Dave! I'm planning to install / retrofit AP into my CH750 STOL this winter.. hopefully! I have the Dynon SV-D1000 panel. I understand the dynon servos to use would be the SV42 size? Do I need one with standard output arm and the other as capstan? What is cost for your servo mount kits and shipping to Ontario, Canada?</p>
<p>Thanks Dave and great job!</p>
<p></p>
<p>Cheers,</p>
<p>Dave F.</p>
<h1 class="product-title product_title entry-title">Dynon SV42C Servo, Capstan…</h1>
<p>Nice work Dave! I'm planning to install / retrofit AP into my CH750 STOL this winter.. hopefully! I have the Dynon SV-D1000 panel. I understand the dynon servos to use would be the SV42 size? Do I need one with standard output arm and the other as capstan? What is cost for your servo mount kits and shipping to Ontario, Canada?</p>
<p>Thanks Dave and great job!</p>
<p></p>
<p>Cheers,</p>
<p>Dave F.</p>
<h1 class="product-title product_title entry-title">Dynon SV42C Servo, Capstan</h1>
<h1 class="product-title product_title entry-title">Dynon SV42 Servo, Standard Output Arm</h1> Peter, thanks for being the f…tag:zenith.aero,2021-05-20:2606393:Comment:8361392021-05-20T02:31:55.081ZDavid J. Beaulieuhttps://zenith.aero/profile/DavidJBeaulieu
<p>Peter, thanks for being the first to try them out with MGL servos...glad they worked out and you're happy with them. Another set using Garmin servos required a slight modification which I've incorporated into the mounts. After 4 revisions/improvements I have a universal design and setup that seems to work well across the Dynon, MGL, Garmin and GRT servos and is easier to fabricate/install.</p>
<p>Cheers, Dave</p>
<p>Peter, thanks for being the first to try them out with MGL servos...glad they worked out and you're happy with them. Another set using Garmin servos required a slight modification which I've incorporated into the mounts. After 4 revisions/improvements I have a universal design and setup that seems to work well across the Dynon, MGL, Garmin and GRT servos and is easier to fabricate/install.</p>
<p>Cheers, Dave</p> David: Just finished instal…tag:zenith.aero,2021-05-19:2606393:Comment:8363612021-05-19T23:54:12.582ZPeter Skedsvoldhttps://zenith.aero/profile/PeterSkedsvold
<p>David: Just finished installing your servo brackets on my 750, it was about 2 1/2 hrs from start to finish , for the install of both brackets and bolting up the MGL servos. I am very impressed with the quality of construction that went into both the roll and pitch brackets . The A&P/ machinist that helped me was also impressed, with your quality of manufacturing. </p>
<p>After I ordered them from , I started to have second thoughts about the purchase, and got to thinking I could…</p>
<p>David: Just finished installing your servo brackets on my 750, it was about 2 1/2 hrs from start to finish , for the install of both brackets and bolting up the MGL servos. I am very impressed with the quality of construction that went into both the roll and pitch brackets . The A&P/ machinist that helped me was also impressed, with your quality of manufacturing. </p>
<p>After I ordered them from , I started to have second thoughts about the purchase, and got to thinking I could have accomplished the task, and built them myself. With all that said, my thoughts on building them myself, disappeared as soon as the box was opened and I saw the care and time you put into their construction. I would without and hesitation , suggest anybody looking at adding Autopilot, use your brackets. Thanks again for building me a set!</p>
<p> Peter Skedsvold<a href="https://storage.ning.com/topology/rest/1.0/file/get/8946945266?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8946945266?profile=RESIZE_710x" class="align-full"/></a></p> David, I'll buy a set! Pete…tag:zenith.aero,2021-05-09:2606393:Comment:8351842021-05-09T12:00:39.795ZPete Krauserhttps://zenith.aero/profile/PeteKrauser
<p>David, I'll buy a set! Pete 7274034688. I am traveling today but will be available later today. Thanks</p>
<p>David, I'll buy a set! Pete 7274034688. I am traveling today but will be available later today. Thanks</p> Hi David, I may be interested…tag:zenith.aero,2021-05-05:2606393:Comment:8346172021-05-05T05:38:29.313ZWerner Fouriehttps://zenith.aero/profile/WernerFourie
<p>Hi David, I may be interested in this for pitch and roll with MGL servos in my Zenith CH750 STOL. I am not sure where this mounts though - I have a fuel header tank under the passenger right-hand-side seat. Do you have some more photos that show where it all fits? </p>
<p>Cheers</p>
<p>Werner</p>
<p>Hi David, I may be interested in this for pitch and roll with MGL servos in my Zenith CH750 STOL. I am not sure where this mounts though - I have a fuel header tank under the passenger right-hand-side seat. Do you have some more photos that show where it all fits? </p>
<p>Cheers</p>
<p>Werner</p> Hi david,
we have a 750 c…tag:zenith.aero,2021-05-01:2606393:Comment:8340842021-05-01T17:33:52.687ZMichael radtkehttps://zenith.aero/profile/Michaelradtke
<p>Hi david,</p>
<p> we have a 750 cruzer, and a grt system. would like to buy just a roll install kit.</p>
<p>friend request sent. </p>
<p>thanks </p>
<p>michael.</p>
<p>Hi david,</p>
<p> we have a 750 cruzer, and a grt system. would like to buy just a roll install kit.</p>
<p>friend request sent. </p>
<p>thanks </p>
<p>michael.</p> Thomas, here is a set of moun…tag:zenith.aero,2021-04-20:2606393:Comment:8329262021-04-20T13:14:48.611ZDavid J. Beaulieuhttps://zenith.aero/profile/DavidJBeaulieu
<p>Thomas, here is a set of mounts made up this weekend for another individual to use with Garmin servos. He already had the rod end bearings and push/pull tubes.…</p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8815739889?profile=original" rel="noopener" target="_blank"><img class="align-full" src="https://storage.ning.com/topology/rest/1.0/file/get/8815739889?profile=RESIZE_710x"></img></a> <a href="https://storage.ning.com/topology/rest/1.0/file/get/8815742055?profile=original" rel="noopener" target="_blank"><img class="align-full" src="https://storage.ning.com/topology/rest/1.0/file/get/8815742055?profile=RESIZE_710x"></img></a></p>
<p>Thomas, here is a set of mounts made up this weekend for another individual to use with Garmin servos. He already had the rod end bearings and push/pull tubes.</p>
<p><a href="https://storage.ning.com/topology/rest/1.0/file/get/8815739889?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8815739889?profile=RESIZE_710x" class="align-full"/></a><a href="https://storage.ning.com/topology/rest/1.0/file/get/8815742055?profile=original" target="_blank" rel="noopener"><img src="https://storage.ning.com/topology/rest/1.0/file/get/8815742055?profile=RESIZE_710x" class="align-full"/></a></p>