Hello there! Currently in the constructing process of my zenith-701 and I am seeking some advice to secure (pound) the soft solid rivets on the elevator trailing edge.  For these small soft rivets do I require a bucking bar, hammer riveter and air compressor?  Or can they be secured in another manner-cheaper method?  Any response applicable would be appreciated. Kerry

Views: 281

Reply to This

Replies to This Discussion

Hi Kerry,

Tatco hand rivet squeezer, sold at the usual aircraft tool suppliers. Aircraft Spruce sells them too.

Jim

Thanks Jim, I had no idea about that tool, great info.

Kerry M

Thank you for the info, I am really glad there is such a tool.

Thanks again

Kerry

I use a hand squeezer for the trailing edges. I found it gave me the best control and results with the small rivets. It is doable to use a large set of channel locks or linemans pliers, modify the faces for the rivet head on one side and smooth the other side to form the shop head and squeeze away. I tried this method with a medium size set of channel locks and modified them to accept squeezer sets, but it took more effort to set the rivets than I was willing to put forth for that many rivets.

Forgot to add if you have not drilled yet please do use a straight level workbench, length of wood, or pvc to drill and cleco right into the wood or pvc as you go, prevents wavy trailing edge syndrome (WTES). 

WTES. I just made that up.

Jim

Hi Jim, luckily I have not drilled any holes yet. I try to be very thorough in planning and be a couple of steps ahead before drilling or cutting. So, your WTES avoidance information will be applied:)

Thanks

Kerry M

Thanks Dan, that is a clever solution I will give a practice piece a try but will most likely order a hand rivet squeezer.

Thanks again

Kerry m 

One more question, with the hand rivet squeezer what size of rivet head and shop head squeeze set did you use with it?

Appreciate your help.

Kerry

Kerry they are an3 rivets so I beleive they take a 3/16 head? (didn't check), I bought a set of the squeezer heads from I think spruce. I needed a variety anyway since I am scratch building, but they give different thicknesses for both the rivet head and the shop head so you can adjust for the amount of squeeze and if you add such things as access prrrates you may need different rivet sizes or thicknesses. Dan.

Thanks Dan

If shopping for aircraft specific tools, The Yard Store is a great resource and has good prices. Just throwing it out there.

I will check that out, thanks for the info Chris.

Kerry M

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service