Zenith Aircraft Builders and Flyers
Online Community of Zenith Builders and Flyers
slick 4001 mags
Does anyone know how to properly install the gears in a 4001 mag? Mine was not operating so i toke it apart but i don't know how the gears were set. Found capacitor wire loose.
Replies to This Discussion
-
Permalink Reply by Stan Cooper on
-
I'll give it a shot; I'm assuming based on your profile (Continental - other) that it's a four cylinder TCM engine. It's not clear from your question whether the gears you're referring to are internal to the mag or the mag gear that meshes with the accessory case gear. Maybe these three pages from the TCM O-240 operator and maintenance manual x30094 will help.
This may be one of those times you get an A&P to show you how to install and time the mag to the engine.
-
Permalink Reply by everett blackwell on
-
Stan, I need to know how to put in the internal gears. I thank you for the timing info. I have called around and nobody works on these mags anymore. I guess i will look around for a used slick 4301. Thanks again.
New from Zenith:
Classified listing for buying or selling your Zenith building or flying related stuff...
Custom Instrument Panels
for your Zenith:
Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.
Zenith Homecoming Tee:
Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz
Builder & Pilot Supplies:
Pro Builder Assistance:
Transition training:
Aircraft Spruce & Specialty for all your building and pilot supplies!
How to videos from HomebuiltHELP.com
Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.
© 2024 Created by Zenith.Aero.
Powered by
