Scratch building Qty of Aluminium sheets - Zenith Aircraft Builders and Flyers2024-03-29T12:27:48Zhttps://zenith.aero/forum/topics/scratch-building-qty-of?feed=yes&xn_auth=noThanks for the feedback....
…tag:zenith.aero,2011-03-30:2606393:Comment:1119062011-03-30T11:17:58.510Zkeith bennetthttps://zenith.aero/profile/keithbennett
<p>Thanks for the feedback....</p>
<p> </p>
<p>Regards Keith</p>
<p> </p>
<p> </p>
<p>Thanks for the feedback....</p>
<p> </p>
<p>Regards Keith</p>
<p> </p>
<p> </p> Thankstag:zenith.aero,2011-03-30:2606393:Comment:1119052011-03-30T11:09:45.010Zkeith bennetthttps://zenith.aero/profile/keithbennett
Thanks
Thanks Hi Gaston,
Thanks for the i…tag:zenith.aero,2011-03-30:2606393:Comment:1120012011-03-30T11:08:23.796Zkeith bennetthttps://zenith.aero/profile/keithbennett
<p>Hi Gaston,</p>
<p> </p>
<p>Thanks for the info very helpful..</p>
<p>This is more than enough info for me to organize enough materials to get started.</p>
<p>I'll order enough for the tail section.</p>
<p> </p>
<p>Do you (or anyone else) know how many cleco's of each size needed for the tail section??</p>
<p> </p>
<p>Kind regards Keith</p>
<p> </p>
<p>Hi Gaston,</p>
<p> </p>
<p>Thanks for the info very helpful..</p>
<p>This is more than enough info for me to organize enough materials to get started.</p>
<p>I'll order enough for the tail section.</p>
<p> </p>
<p>Do you (or anyone else) know how many cleco's of each size needed for the tail section??</p>
<p> </p>
<p>Kind regards Keith</p>
<p> </p> Here is a worksheet i prepare…tag:zenith.aero,2011-03-29:2606393:Comment:1119892011-03-29T23:00:27.936ZGaston Brawleyhttps://zenith.aero/profile/GastonBrawley
Here is a worksheet i prepared to estimate materials. Each part is listed, with overall diminsion, quantity, material and specifications. You can attach price list downloaded from AS to get an estimate of total material cost. My estimate is .016 * 3, .025 *12, .032 * 2, and .040 *1. Hope this helps. I also have tube amounts listed for estimating controls and LG. I have not started building yet, so I can't confirm estimates, but retirement starts in 10 months and I am getting ready to…
Here is a worksheet i prepared to estimate materials. Each part is listed, with overall diminsion, quantity, material and specifications. You can attach price list downloaded from AS to get an estimate of total material cost. My estimate is .016 * 3, .025 *12, .032 * 2, and .040 *1. Hope this helps. I also have tube amounts listed for estimating controls and LG. I have not started building yet, so I can't confirm estimates, but retirement starts in 10 months and I am getting ready to build. I am spending 2011 finishing workshop, work table and building WW Corvair Engine. Good luck. 13 to 15 sheets 6061-T6 x 0.0…tag:zenith.aero,2011-03-26:2606393:Comment:1107902011-03-26T19:36:32.684Znelson Dhttps://zenith.aero/profile/nelsonD
13 to 15 sheets 6061-T6 x 0.025 is what i hear with no mistakes
13 to 15 sheets 6061-T6 x 0.025 is what i hear with no mistakes You'll find lots of useful in…tag:zenith.aero,2011-03-25:2606393:Comment:1106612011-03-25T07:06:42.175ZMichael Heintzhttps://zenith.aero/profile/Mic
<p>You'll find lots of useful information at this site (including materials lists):</p>
<p><a href="http://www.ch601.org/builder%20resources.htm" target="_blank">http://www.ch601.org/builder%20resources.htm</a></p>
<p>Good luck!</p>
<p>You'll find lots of useful information at this site (including materials lists):</p>
<p><a href="http://www.ch601.org/builder%20resources.htm" target="_blank">http://www.ch601.org/builder%20resources.htm</a></p>
<p>Good luck!</p>