Review before closing up is my rule.. I did not do a comprehensive look just a quick check. Now I will be drilling out rivets to install an an3 bolt in my rear strut bracket on my fully riveted right wing!! Hopefully it looks as good the 2nd time as the firat!!

Views: 291

Attachments:

Reply to This

Replies to This Discussion

INSTEAD CUT A 5.5 IN DIAMETER ACCESS HOLE, THEN RIVET A 6 IN COVER PLATE WHEN YOU ARE DONE INSTALLING THE BOLT.  I DID THIS IN MANY AREAS.  THESE COVERS MAKE THE ANNUAL EASIER.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service