HI

  I have a question about what tools do I need for wiring. I am planning a panel upgrade in the future. I'm collecting all the parts and tools I will need ahead of time. I have bought the hole knockouts for the 3/18 and 2 1/4 inch holes. I also bought a dimpler for flush riveting. Question is, what type of terminal crimper do I need to buy and where, (Aircraft Spruce) or somewhere else. Also I want to have some wire on  hand. What size , type of wire do I need?. And also terminals. Is there a kit you can purchase with the terminals you will need for an aircraft. Or do I need to buy individual terminals ? Any help would be appreciated cause I'm new to this and would like to have everything I need before I start. Thanks. 

Views: 334

Reply to This

Replies to This Discussion

Ok Thanks Bob

I had forgotten about the courses they offer. I'll keep my out if one comes close by. 

Good advice from prior posts. 

Some items not mentioned that you might need. 

If you are wiring avionics using Sub D and high density Sub D connectors (virtually every modern avionics and display units use them) you will need a special crimper for Sub D pins and a set of pin extractors (or possibly 2 sets, they bend up easily).  You also need a reasonably compact heat gun for doing heat shrink. 

For ring terminals I use the high quality marine grade that are gold plated and have the integral heat shrink insulator.  They are highly resistant to vibration and corrosion (and not cheap, but relatively easily available. They are as good or better than most of the terminals I have seen in aircraft. 

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service