Pitot and Static Lines/Alternate Static - Zenith Aircraft Builders and Flyers2024-03-28T19:31:16Zhttps://zenith.aero/forum/topics/pitot-and-static-lines-alternate-static?feed=yes&xn_auth=nowhat was the part numbers fro…tag:zenith.aero,2012-08-08:2606393:Comment:2307812012-08-08T11:02:02.865ZChris Sinfieldhttps://zenith.aero/profile/chrisSinfield
<p>what was the part numbers from spruce as there appear to be a few different static ports available?</p>
<p>Chris</p>
<p>what was the part numbers from spruce as there appear to be a few different static ports available?</p>
<p>Chris</p> Thanks for the responses. Th…tag:zenith.aero,2012-08-08:2606393:Comment:2306952012-08-08T02:53:30.907ZSteven Tschurwaldhttps://zenith.aero/profile/StevenTschurwald
<p>Thanks for the responses. That answer my questions. We are working on some ideas here to make pitot and static plumbing easier. In addition, we are developing a unique alternate static system. I was just curious if builders were using aftermarket mods on this or going with a stock system. I'll post more info when it's available.</p>
<p></p>
<p>Happy building</p>
<p>Steve</p>
<p></p>
<p>Thanks for the responses. That answer my questions. We are working on some ideas here to make pitot and static plumbing easier. In addition, we are developing a unique alternate static system. I was just curious if builders were using aftermarket mods on this or going with a stock system. I'll post more info when it's available.</p>
<p></p>
<p>Happy building</p>
<p>Steve</p>
<p></p> I have the dynon pitot but it…tag:zenith.aero,2012-08-08:2606393:Comment:2306062012-08-08T01:40:41.267ZChristopher Nailhttps://zenith.aero/profile/Nail1982
I have the dynon pitot but it's pitot and aoa only. I bought two static ports from spruce an put them under the baggage (650) behind the rear wing attach uprights, one each side. I ran 1/4" nylon tube up to a t-junction so any water would drain out. From that "t" is a single 1/4" nylon tube to the back of the dynon.<br />
<br />
Oh and the tube came with kit. Given the slightly mod'd set up I don't know if all nylon will be enough to run from wings and static setup.
I have the dynon pitot but it's pitot and aoa only. I bought two static ports from spruce an put them under the baggage (650) behind the rear wing attach uprights, one each side. I ran 1/4" nylon tube up to a t-junction so any water would drain out. From that "t" is a single 1/4" nylon tube to the back of the dynon.<br />
<br />
Oh and the tube came with kit. Given the slightly mod'd set up I don't know if all nylon will be enough to run from wings and static setup. Steve
I'm the same as Dave
ht…tag:zenith.aero,2012-08-08:2606393:Comment:2306782012-08-08T00:04:40.592ZBob McDonaldhttps://zenith.aero/profile/BobMcDonald
<p>Steve</p>
<p>I'm the same as Dave</p>
<p><a href="http://safeair1.com/averytools/pitotstaticplumbingkit.php">http://safeair1.com/averytools/pitotstaticplumbingkit.php</a></p>
<p>Bob</p>
<p>Great product</p>
<p>Steve</p>
<p>I'm the same as Dave</p>
<p><a href="http://safeair1.com/averytools/pitotstaticplumbingkit.php">http://safeair1.com/averytools/pitotstaticplumbingkit.php</a></p>
<p>Bob</p>
<p>Great product</p> Hi Steven, yes, the Zenith ki…tag:zenith.aero,2012-08-07:2606393:Comment:2306752012-08-07T23:26:59.153ZDave Gardeahttps://zenith.aero/profile/DaveGardea
<p>Hi Steven, yes, the Zenith kits do come with a pitot static tube and some line for plumbing, but I chose to go with the following products from SafeAir1:</p>
<p><a href="http://safeair1.com/averytools/pitotstaticplumbingkit.php" target="_blank">http://safeair1.com/averytools/pitotstaticplumbingkit.php</a></p>
<p><a href="http://safeair1.com/averytools/pitotmast.php" target="_blank">http://safeair1.com/averytools/pitotmast.php</a></p>
<p>and from ACS I installed on the above pitot mast the…</p>
<p>Hi Steven, yes, the Zenith kits do come with a pitot static tube and some line for plumbing, but I chose to go with the following products from SafeAir1:</p>
<p><a href="http://safeair1.com/averytools/pitotstaticplumbingkit.php" target="_blank">http://safeair1.com/averytools/pitotstaticplumbingkit.php</a></p>
<p><a href="http://safeair1.com/averytools/pitotmast.php" target="_blank">http://safeair1.com/averytools/pitotmast.php</a></p>
<p>and from ACS I installed on the above pitot mast the below</p>
<p>DYNON AOA PITOT UNHEAT L TUBE W/O BRACKET 10-01157</p>
<p>On my CH650 I installed the static ports one on each side of the fuselage just aft of the rear wing spar below the top longeron.</p>
<p>Regards,</p>
<p>Dave</p>