Hope this helps some of you kit builders. Have to admit it took me a few hours of scotchbriting until finally, I now know how to remove those stubborn paper labels from the aluminium parts... 

 

1. spray label with a little WD-40,

2. wait a couple of minutes till it soaks in, then

3. scrape label off using scrap aluminium extrusion.

 

No scratches, as the tool is the same hardness as the part!  Remember to degrease when done.

Views: 406

Reply to This

Replies to This Discussion

Doesn't the WD-40 have silicone in it? Aluminum is rather porous ... I wouldn't use any silicone where I might ever eventually apply paint - fine to use it elsewhere. The degreaser may get it, but I've heard you can't bet on it.

 

I've found two methods:

 

A heat gun works great - gently heat and it peels right off.

or,

Soak the label with acetone for few seconds, it'll usually peel off with minimal, if any adhesive residue.

 

Regards,

John

thanks for the replies, everyone!    I should have pointed out that some of my labels are over 15 years old, so the glue is really tough - the heatgun method needs such a long time that the heat treatment of the parts could be affected, and it's ok John, there is no silicone in WD-40.    My problem with acetone and thinners is I find some solvents give me a real headache!

We used Lacquer Thinner at the Rudder Workshop.  I used it ever since.

 

- Pat

I like acetone plus a plastic putty knife.
Wet the label with rubbing alcohol, let sit for 2 min, and it peals right off. A little on a rag after and the glue will wipe right off as well.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service