I have a 601hd  that's being flown but has never been painted.I have no painting experience and there are no aircraft painters in my area.I am wondering if an auto body shop would be a reasonable option and an approximate cost. Any thoughts?

               Thanks,

                     Tom Tweedy 

Views: 284

Reply to This

Replies to This Discussion

You want to make sure they don't take the heads off the rivets when they prep the surface and they use minimal paint. Light coats, primer and top coats. You can really add a lot of weight with paint so you need to make sure they understand that.

I will echo Ron's suggestion of tutoring the auto body shop on weight. Years ago a friend had a damaged wheel pant. When he priced the cost of a replacement, he took the old one to a well established auto body shop that he had used for car collision repairs in the past. When he got the wheelpant back, it was beautiful, the shape was perfect, the mounting holes all lined up perfectly, the paint gleamed and was a perfect color match, it was a work of art. It also weighed almost fourty pounds! (Bondo, reinforcing metal welded and rivited in, numerous coats of primer-filler, regular primer and finish paint, etc etc). In the end, my friend paid the body shop and then bought a replacement wheel pant from an aircraft salvage yard. The beautiful one is a conversation piece in his hangar.

 

Also, be sure the shop knows how to prep aluminum for paint, not all do.

My CH601HD was paint in a home garage, vapour barrier spray booth. Paint used was Edura...see web site for additional info. My CH750 was painted in an automotive paint shop...special instructions, paint & prep. It also cost $8,000 and took the shop 5 days to prep & paint.(paint icluded in price). I intend to paint my floats in the garage or hangar with Endura.

Tom, If you are not painting the airplane for show quality you may wish to do as I did and use LATEX...I know it sounde crazy but if you think about it your rain gutters on your house are painted with latex and now Krylon also makes a clear coat for latex. Cost is about $20.00 a gallon for paint instead of $300. a gallon for aircraft paint. If you are interested here is my paint process:  (Non-Toxic) 

Paint Process

 

 

Now for the basic information; Paint and process.

The Paint I chose was ACE Hardware Premium Latex, the primer is ACE Hardware Galvanized and Aluminum Primer.

There is also available a Latex Clear Coat from Krylon, the additional items you will need are Automotive windshield washer fluid, I am using the blue colored stuff, and a product called FlowTrol.

 

First I prepare the surface with a 3-M scratch pad to give me some tooth for the primer, then clean with Liquid solvent.

 

 In a coffee can I put about 1to1-1/2" of FlowTrol in the bottom and then add primer to about 3/4 to 4/5th's of what it would take to fill the spray gun, Then I stir and add the windshield washer fluid to thin until I can get the paint to run off the stick and go from a run to a drip between 4 and 5 seconds, you may need to experiment for yourself on the adjustment that works best for you.

 

I then strain this into my spray gun and set the air pressure at 80#psi, ya I know that is real high, I shut off the controls on the gun and then re set it spraying against a sheet of paper until I get the mix I want, then I spray the part.

 

 I use light coats and find that by using a reasonably fine mist by the time I reach from one side of the wing to the other the first part has flash dried and I can go back and add the next coat.   In  doing this I found the paint flowed out flat without any runs or any type of orange pealing. I layed on enough to cover the part for protection as I know I will be putting paint over it later. 

 

 I use the same process with the colored paint and after only a little practice found it was very easy to put on and the results look great, but will look better after the clear coat.

 

Latex paint runs in the area of about $20-$30 which is a lot better than the $300 a gallon for the aircraft stuff. Now does it look as good as the expensive stuff, probably not but I was not building a show plane it is a working plane and a fun to fly plane I am  not looking for any trophy's.

 

Another thought which has come up since I did my project is Auto Zone and other Automotive stores carry the Dupli-color brand of paints, these are automotive paints of a lacquer base and are already to use out of the can, this may be a little more costly but I am sure the end result would be a better looking result, however, this is back to toxic or semi toxic materiel's and will require respiratory protection etc.

 

So for the paint is holding up well and as I said I expect it to do better after clear coating it. I hope I have answered your questions and have been of some assistance, You are of course welcome to come and visit any time.

 

Phil O

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service