So I've begun painting...

Many of our modern paints require relatively precise mixes, so when you'r painting small pieces i.e. cowl to get the hang of things it makes sense to mix small amounts.  If you've got gallon containers, this is a PIA and will result in a gigantic mess, and most likely inacurate mix quantities.  So I had an epiphany while I was driving by a feed store...  How about a large horse syringe? AHA, Perfect I thought.  I carefully portioned my paint using my syringes, and used a separate syringe for each component.  All was going well. The neatest I've ever painted. I sprayed a light tack coat, waited a few and started laying down a base coat.   Fish eyes started appearing, first one or two, then a total disaster.  FISH EYES EVERYWHERE!!!  Was my air clean, did I have oil on one of my rags?  I decided to try to backtrack.  I used a clean paint brush and painted a little aluminum.  A few fish eyes popped up.  So I decided to take one of my syringes, dab my dry paint brush on the rubber plunger, and then paint a piece of scrap.  Extreme fish eyes.  At this point I had isolated it to the paint, not the air, gun or surface.  Here's the kicker.  The plunger on these sterile syringes are lubricated with apparently some sort of silicone or similar.  VIsibly, the plunger looks perfectly dry and clean.  I am amazed at how little silicone it takes to totally ruin a paint job.  Absolutely amazed.  If anyone can share a similar experience, or something else not to do, it might save someone else the hours of sanding and reprep that I got to do this weekend.  All because I thought I was so clever with my syringe idea.

Views: 486

Reply to This

Replies to This Discussion

Thank you for this info...
Go to any store that sells auto paint supplies- they have graduated containers in various ratios( 3 to 1, 4 to 1) for paint mixing  in various quantities from a cup on up to half a gallon.
Indeed they do, the issue was trying to transfer small amounts from a big gallon container.  That's where I got the bright idea for the syringe.  I finally just punctured a small hole in the top of the can which worked.  and Ive got success now!  Cowl is finished and I'm very happy with the results.

One suggestion for mixing small amounts is stainless steel measuring spoons and cups.  My paint supplier sold me a set with the paint.  I have never used the spoons, but have used the small cups ever time so far.  My paint cans have the ratios on the label ie. 4-1-1 or 8-1-2, etc.  I just use the same cup and count.  If it were any more difficult, I probably would mess it up.

 

 

Hmmm, so you need clean air. Not sure I would have realized that.

Thanks.

Thanks again Steve for the reply (and especially for the advice).

Takes a real man (or woman) to admit their mistakes in public for the good of all of us!

Best,

Joe

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

Transition Training:

Pro Builder Assistance
 

Pro Builder Assistance

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service