Hi, All;

I attempted to install the lower bearing,support, block, etc., for my Cruzer. My bearing block is about 2.5mm too wide to fit between the sides of the center firewall stiffener. The specs for the block show it's supposed to be 94mm wide, mine is 96.52mm (3.80" converted to mm).

Did you sand-down the block to make it fit? Did you try to do both sides so that the strut remained centered in the bearing? New block?  I have a note in to Roger, but no answer yet. Was just curious if others had this issue and how it was resolved, just in case I can do something on my own.

Thanks!

Views: 101

Reply to This

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service