New Zenith nosegear shock absorber system for Corvair engine only - Zenith Aircraft Builders and Flyers2024-03-28T23:18:21Zhttps://zenith.aero/forum/topics/new-zenith-nosegear-shock-absorber-system-for-corvair-engine-only?feed=yes&xn_auth=no$399tag:zenith.aero,2019-07-30:2606393:Comment:6858732019-07-30T16:38:08.332ZDavid Banahanhttps://zenith.aero/profile/DavidBanahan
<p>$399</p>
<p>$399</p> Do you mind telling us the co…tag:zenith.aero,2019-07-29:2606393:Comment:6857922019-07-29T20:14:14.217ZGeorge Burnshttps://zenith.aero/profile/GEORGEWBURNS
<p>Do you mind telling us the cost of the donut system? </p>
<p>Do you mind telling us the cost of the donut system? </p> When you install the donut su…tag:zenith.aero,2019-07-26:2606393:Comment:6854092019-07-26T20:50:49.567ZDavid Banahanhttps://zenith.aero/profile/DavidBanahan
<p>When you install the donut suspension system the top of the last donut should be 22mm down from the top of the steel tube. This allows space to install the bearing blocks at the bottom and will save lots of time pre-tensioning the system.</p>
<p> </p>
<p>When you install the donut suspension system the top of the last donut should be 22mm down from the top of the steel tube. This allows space to install the bearing blocks at the bottom and will save lots of time pre-tensioning the system.</p>
<p> </p>