new to building

so i have been doing research on scratch building while i wait for my plans to get in... my question is based on the fact that i have never seen a full size set of plans.  when im building lets just say ribs are the plans full size???/ so would i have to trace on something like wax paper and then go from there or is it more complicated than im thinking

Views: 656

▶ Reply to This

Replies to This Discussion

Permalink Reply by Jim Gibbs on March 9, 2013 at 5:05pm

Instead of using a compass and ruler, try using emachineshop.com   You can draw a full size template and then print them out on your printer.  For parts larger than 8.5 x 11'' paper, draw the WHOLE part, then create a printable portion.  here are a few files to get you started. Tape the printable portions together.

Much easier to cut-out the part, if you use some spray glue to attach the template to the blank.

Attachments:

RSS

New from Zenith:

Zenith Planes For Sale 
  

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.

Zenith Homecoming Tee:

Zenair Floats

Flying On Your Own Wings:
 A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service