Has anybody ever accomplished this? If so, what is the performance like? And how was the handling?

Views: 658

Reply to This

Replies to This Discussion

Hi.  You could check out the Ben Hass 801.  He uses an all aluminum nascar ford 302 engine that is detuned to 350 hp.

I know of an RV-10 with a zr-1 Corvette engine here in Texas.

My gut reaction is "too much engine"......... The plane was designed around a 180 HP Lycoming. Many homebuilts end up with waaayyyyyy more engine (both weight and power output) than the designer had in mind, and most of them end up being too heavy, CG out of limits forward, difficult to fly and very expensive/difficult to build by the time you work around all the problems you create for yourself with huge engines. Chris Heinz is very easy going compared to most aircraft designers, he gives a weight and power range that the airframe can handle and wishes you luck. If you use the engine he had in mind, you can get engine installation parts from his companies. If you use another engine, his companies will help you as much as they can. If you put anything into a Van's RV other than the engine Van designed it around, the company does not want to talk to you very much.

After that rant, I should ask -- Does the Vette engine (with associated reduction drive, radiator, coolant, etc etc etc) fit into Chris H's weight and power "window" for the 801? If it does not, I would recommend against it. My two cents.

Ok...... I will chime in here... <G>..


First off,,, The 801 will handle excess horsepower....  My set up is 437 lbs FFW so it is within Zeniths recommended weight.. I am double the HP requirement... I am coming up on 500 hours and still have not made the lead story in the evening news... <G>


All kidding aside... My plane is WAY overpowered, but I like overpowered stuff... It would probably hurt or kill less experienced nut cases... 


DAMN!!!!   Every time I see your setup Ben I drool!!!


New from Zenith:

Zenith Planes For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.

Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

Zenith Apparel from EAA:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz

Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:


West Coast USA:

Pro Builder Assistance:


Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2021   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service