Hi can anyone help with the ADAHRS failure. After one engine run the PFD shows that the ADAHRS fail. But the previous engine runs , the ADAHRS still works normally. please help us with this problem . we highly suspect that the ADAHRS might be damaged . Do u guys think its possible?

Views: 477

Reply to This

Replies to This Discussion

You would get that message if the network cable came unplugged.

hi ken,

We plug in the network cable and everything was connected as it shd be however the screen still show that big red cross. we suspect that the ADAHRS module might be damage as we did a continuity check using an ammeter and it was not the wire problem. so we think it is the ADAHRS moduel problem.  

Adding on there was this pic showing that the connection failed 

Have you contacted Dynon? Their support is excellent.

Yes i am currently doing so. Thanks for the reply and information given. Greatly appericatd.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service