I have an MA3 carb I'm using on my 0-235 engine. It appears to me that on the fuel inlet fitting there should be a special gasket/seal or something where the fitting screws into the carb body. Can anybody tell me what I need here?



Views: 59

Reply to This

Replies to This Discussion

this is the fitting, fuel in

There is a gasket between the fitting with the inlet finger screen and carb body but where your fuel supply hose goes into the carb fitting no gasket.

You can probably get one from aircraft spruce but you will need a parts list for your particular model to be sure. Most are a 16-A36 but depends on the part number of the carb (on the stamped plate at the front of the carb).


New from Zenith:

25th Anniversary: 1992 - 2017

Weather Maps

Custom Instrument Panels
for your Zenith

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.

New Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits

New Zenith Apparel from EAA:

Zenair Floats

Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz.

Builder & Pilot Supplies:

Zenith transition training

and Sport Pilot:

Quality Sport Planes
Cloverdale, California:

© 2017   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service