I have an MA3 carb I'm using on my 0-235 engine. It appears to me that on the fuel inlet fitting there should be a special gasket/seal or something where the fitting screws into the carb body. Can anybody tell me what I need here?

Thanks

Gil

Views: 258

Reply to This

Replies to This Discussion

this is the fitting, fuel in

There is a gasket between the fitting with the inlet finger screen and carb body but where your fuel supply hose goes into the carb fitting no gasket.

You can probably get one from aircraft spruce but you will need a parts list for your particular model to be sure. Most are a 16-A36 but depends on the part number of the carb (on the stamped plate at the front of the carb).

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service