For any aircraft model using the Lycoming O-235:

When I sensored up my engine I used a threaded "port" (not sure if that is the right term) on the accessory case just above the right magneto for the oil pressure sensor on my Dynon D-180.

I just happened to be browsing through the Owner's Manual for the O-235L2C and noticed that Lycoming astricked the L model and it says "Front of Engine". for oil pressure location. The max pressure is listed as 90, minimum is 50, and at idle, 15. 

Where, exactly, do they consider "Front of Engine"?

Those of you flying behind an -L model Lycoming, where did you pick off for oil pressure?

Brad Cohen

N969BC

Views: 585

Reply to This

Replies to This Discussion

Right side of the rear case.

Yep. 

That's where I put mine as well.

Just wondering why Lycoming would astrick it as "front of engine"

Quoting the Description section of the Lycoming manuall, section one says..... "In referring to the location of the various engine components, the parts are described in their relationship
to the engine as installed in conventional airframes. Thus the power take-off end is considered the front and
the accessory drive section the rear. The sump section is considered the bottom and the opposite side of the
engine where the shroud tubes are located is the top."

So, the front and rear are as oriented in your plane - the front is towards the front of the plane, the end of the engine with the propeller on it.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, Dynon and Garmin avionics, and more.


Zenith Homecoming Tee:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Lavion Aero

K&S Aviation Services

Aircraft Spruce & Specialty for all your building and pilot supplies!

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

© 2024   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service