Online Community of Zenith Builders and Flyers
I have been to the Dynon forum site for connection info of the 2000C to the D100 and it says "Hook the TX line from the data cable to pin 22 on the EFIS or pin 3 on the serial update port. Connect the ground of the data cable to aircraft ground, or any ground on the EFIS."
This assumes you have NMEA/DGPS Adapter Cable (NDC-2) from the 2000C. That cable has 4 wires out 1. White (transmit) to EFIS (yellow/green), 2. Red (power), 3. Black (Ground), and finally
4. Green (receive) ?????? Green to what on EFIS? Receive what?
Thanks for the reply...
Thanks Ken...about what I thought...
LEI suggested I go to Jeppeson. Will do that next, haven't had time right now...wiring the panel.