Before I begin rebuilding the damaged wings I have on the ch701 I just purchased. I thought I'd check to see if anyone had some wings hanging in there garage.

Views: 662

Reply to This

Replies to This Discussion

I have a horizontal stabilizer and elevator with VGs from a hard landed 2013 701 (220hrs) that I recently purchased. No damage to these parts. I also have a complete rudder that has never been flown.  The wings and fuselage from the 701 were not usable. I am moving the engine, controls,etc. over to a partial kit that had a complete tail setup. If you have an interest let me know.

Located in central Missouri about 45 min from Zenith plant

Jim Strong  

573-690-6460  (cell)

I would like to stop and pick up/buy any parts you will not need that I can use. I also need the foot controls as mine were broken. and engine mount bolts, brackets, radiator etc. My engine was removed before I bought my plane and I just got a Rotax 912 80hp ;but I only have oil tank, oil cooler. and engine bed mount type but missing dynafocal brackets and bushings. also need a part for a brake pad bracket.

I will be using all the engine, control parts and all the landing gear (brakes) in my build. I do have some partial flaps that could be reused and one slat that could be easily repaired. The 701 I am parting had 4 wing tanks (40 gal) that are not damaged and were drained right after the accident that could be reused. I plan on putting only one tank (20 gal) back in the new wings. Give me a call and we can discuss the parts.

Jim

Sorry I haven't called you yet I have been busy.
Do you have brackets that connect engine to the bed mount? Also need foot pedals, radiator, newer style doors would be nice. A propeller. Newer style landing gear (the 6 foot wide spring between the 2 tires)?

I do not have any engine connecting brackets, foot pedals, radiator or doors......will be using these parts for my build. I do have an extra newer style main landing gear spring that came with the original kit from Zenith. It is used and, like any of these used gear, it is probably a little wider than spec but appears very usable.  It does not have any brakes or axles or wheels on it.

I have a rudder, 3 flap sections and damaged horizontal stab.
I do need the outer left flap. Do you have brackets that connect engine to the bed mount? Also need foot pedals, radiator, newer style doors would be nice. A propeller.

We have a vertical fin, horizontal stab. and elevator from a partially completed kit that was donated to a non-profit.  They are located at the St. Joseph, MO Rosecrans airport.  If interested, call me and we will arrange a good price.

Jim Smith

816-253-1049

Are you still looking for wings and tail for a 701 ?

Bob

Have everything accept the wings. Sort of. I feel confident repairing the minor damage to my tall pieces but with the wings I would like to just bolt on some never before damaged wings. Getting closer to seeing daylight under the wheels. Just stalled all summer with the kids home from school. Will hit or hard this winter.
Ricky
One thing to consider is that there is a risk that a wing built by someone else may not fit the attachment points of the aircraft you purchased. If the distance between fore and aft mount points on the wing you buy is longer (and minimal) you may be able to shim, but if not, or if shorter, you have some time consuming rework to do on the wing to achieve proper fitment. Before buying I recommend you ask for the seller to provide that distance to you so you can compare it to your fuselage.
Jim
Great info Jim. I would hate to drive from Iowa to Texas just for a headache. If nothing easy comes up I will repair my own wings this winter. I have the metal already anyway.

RSS

New from Zenith:

Zenith Planes For Sale 
 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

Aircraft Insurance:

 
 

West Coast USA:

 
Pro Builder Assistance:

 

Transition training:

Golden Eagle Aviation

Pianosa Flying Farm

Aircraft Spruce & Specialty for all your building and pilot supplies!

© 2020   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service