I am getting ready to install the (CH601-HD) landing gear.

The steel struts need some coating for corrosion protection.

I looked a chrome plating, but the cost is a bit too much (close to CA$500, including treatment against embrittlement).

I saw comments about a 2 part epoxy aerosol, but it seems to be (1) hard to find and (2) pricey...

(Rust-Oleum Vk9300 System 2K Epoxy)

There's the possibility of powder coating it... I expect the price would be more reasonable than plating.

Any suggestions? (I do not have a compressor, so spray painting is limited to aerosol cans).

Views: 353

Reply to This

Replies to This Discussion

don't know about the availibility in Canada, but Eastwood offers the 2 part epoxy in aerosol here in the US if that is the route you decide on. Dan.

Powder-coating is the way to go on these.

Or, you can paint but forget about aerosol stuff without a mixed in hardener.  

I had mine powder coated in Port Huron Michigan for less than $100 US..

I also went with powder coating. Doesn't cost much and lasts for years to come.

We decided to to paint all steel parts with a good epoxy primer an top coat. We then rinsed all accessible cavities's with SEM 39574 Rust Preventer Cavity Wax.

The reasons why we decided against powder coating were that it can't be repaired, that the bond with the metal is not as strong as with an epoxy primer what makes it easier for rust to creep under it and that it also adds quite a bit of thickness, what can be problematic in some areas.

Personally, I would only powder coat parts, where wear is a bigger concern than corrosion, like the rudder pedals.

Oliver

Thank you all for your comments, much appreciated.

I still haven't decided, but I have already powder coated some parts (canopy frame, pedals, firewall), so I know how tough the material is.

I am leaning that way, unless I find someone nearby that can do the painting for me.

Carlos

It's been a while since I purchased any and I know it costs more than paint. The product is made by POR 15 chassis coat black in a spray can. It's tough and coats very smoothly.  7 years on my motorcycle forks and looks as good as the day I painted them. I used this on parts that I didn't want to powder coat. 

Thanks for the tip, Charles

RSS

New from Zenith:

Zenith Aircraft For Sale 

Classified listing for buying or selling your Zenith building or flying related stuff...

                                                     

Weather Maps


Custom Instrument Panels
for your Zenith
:

Custom instrument panels are now available directly from Zenith Aircraft Company exclusively for Zenith builders and owners. Pre-cut panel, power distribution panel, Approach Fast Stack harnesses, Dynon and Garmin avionics, and more.


Custom Upholstery Kits for your Zenith Aircraft:

Zenith Vinyl Upholstery Kits


Zenith Apparel from EAA:


Zenair Floats


Flying On Your Own Wings:
A Complete Guide to Understanding Light Airplane Design, by Chris Heintz


Builder & Pilot Supplies:

How to videos from HomebuiltHELP.com

Developed specifically for Zenith builders (by a builder) these videos on DVD are a great help in building your own kit plane by providing practical hands-on construction information. Visit HomebuiltHelp.com for the latest DVD titles.

 

Zenith transition and Sport Pilot training:

Quality Sport Planes
Cloverdale, California:

Wheels & Wings

Pro Builder Assistance

© 2019   Created by Zenith.Aero.   Powered by

Badges  |  Report an Issue  |  Terms of Service